Siemens SINUMERIK 840D sl Manuals

Manuals and User Guides for Siemens SINUMERIK 840D sl. We have 88 Siemens SINUMERIK 840D sl manuals available for free PDF download: Function Manual, Commissioning Manual, Programming Manual, Diagnostic Manual, Operating Manual, Operation/Programming Manual, Manual, Configuration Manual, Installation Manual, Operating Instructions Manual, System Manual, Upgrade Instructions

Siemens SINUMERIK 840D sl Function Manual (1799 pages)

Brand: Siemens | Category: Control Systems | Size: 13.81 MB

- 3
  Preface
- 9
  Table of Contents
35
1 A2: Various NC/PLC Interface Signals and Functions
- 35
  Brief Description
- 36
  NC/PLC Interface Signals
- 36
  General
- 38
  Ready Signal to PLC
- 38
  Status Signals to PLC
- 39
  Signals To/From Panel Front
- 41
  Signals to Channel
- 41
  Signals to Axis/Spindle
- 50
  Signals From Axis/Spindle
- 51
  Signals to Axis/Spindle (Digital Drives)
- 53
  Signals From Axis/Spindle (Digital Drives)
- 55
  Functions
- 55
  Screen Settings
- 56
  Settings for Involute Interpolation - Only 840D Sl
- 59
  Activate DEFAULT Memory
- 59
  Read/Write PLC Variable
- 63
  Access Protection Via Password and Keyswitch
- 64
  Password
- 65
  Keyswitch Settings (DB10, DBX56.4 to 7)
- 66
  Parameterizable Protection Levels
- 67
  Examples
- 69
  Data Lists
- 69
  Machine Data
- 69
  Display Machine Data
- 70
  Nc-Specific Machine Data
- 70
  Channelspecific Machine Data
- 71
  Axis/Spindlespecific Machine Data
- 72
  System Variables
- 72
  Signals
- 72
  Signals to NC
- 72
  Signals From NC
- 73
  Signals to Operator Panel Front
- 73
  Signals From Operator Panel Front
- 73
  Signals to Channel
- 74
  Signals From Channel
- 74
  Signals to Axis/Spindle
- 74
  Signals From Axis/Spindle
77
2 A3: Axis Monitoring, Protection Zones
- 77
  Brief Description
- 77
  Axis Monitoring Functions
- 77
  Protection Zones
- 78
  Axis Monitoring
- 78
  Contour Monitoring
- 78
  Contour Error
- 78
  Following Error Monitoring
- 81
  Positioning, Zero Speed and Clamping Monitoring
- 81
  Correlation Between Positioning, Zero-Speed and Clamping Monitoring
- 81
  Positioning Monitoring
- 83
  Zero Speed Monitoring
- 84
  Exact Stop and Standstill Tolerance Dependent On the Parameter Set
- 84
  Clamping Monitoring
- 91
  Speed-Setpoint Monitoring
- 93
  Actual Velocity Monitoring
- 94
  Measuring-System Monitoring (Systems With PROFIBUS Drives)
- 95
  Limit Switches-Monitoring
- 95
  Hardware Limit Switches
- 96
  Software Limit Switch
- 98
  Monitoring of the Working Area Limitation
- 98
  General
- 100
  Working Area Limitation in BKS
- 102
  Working Area Limitation in WKS/ENS
- 106
  Deactivating All Monitoring Functions: "Parking
- 107
  Protection Zones
- 107
  General
- 108
  Types of Protection Zone
- 111
  Definition Via Part Program Instruction
- 114
  Definition Via System Variable
- 116
  Activation and Deactivation of Protection Zones
- 120
  Protection-Zone Violation and Temporary Enabling of Individual Protection Zones
- 125
  Restrictions in Protection Zones
- 127
  Supplementary Conditions
- 127
  Axis Monitoring Functions
- 128
  Examples
- 128
  Axis Monitoring
- 128
  Working Area Limitation in WKS/ENS
- 130
  Protection Zones
- 130
  Definition and Activation of Protection Zones
- 141
  Data Lists
- 141
  Machine Data
- 141
  Nc-Specific Machine Data
- 141
  Channelspecific Machine Data
- 142
  Axis/Spindlespecific Machine Data
- 143
  Setting Data
- 143
  Axis/Spindlespecific Setting Data
- 144
  Signals
- 144
  Signals to Channel
- 144
  Signals From Channel
- 145
  Signals to Axis/Spindle

Siemens SINUMERIK 840D sl Function Manual (1726 pages)

Brand: Siemens | Category: Controller | Size: 9.8 MB

- 3
  Preface
- 7
  Table of Contents
33
1 Fundamental Safety Instructions
- 33
  General Safety Instructions
- 33
  Industrial Security
35
2 A2: Various NC/PLC Interface Signals and Functions
- 35
  Brief Description
- 35
  NC/PLC Interface Signals - Only 840D Sl
- 35
  General
- 37
  Ready Signal to PLC
- 37
  Status Signals to PLC
- 38
  Signals To/From the Operator Panel Front
- 40
  Signals to Channel
- 40
  Signals to Axis/Spindle
- 48
  Signals From Axis/Spindle
- 50
  Signals to Axis/Spindle (Digital Drives)
- 51
  Signals From Axis/Spindle (Digital Drives)
- 53
  Functions
- 53
  Screen Refresh Behavior for Overload - Only 840D Sl
- 54
  Settings for Involute Interpolation - Only 840D Sl
- 57
  Activate DEFAULT Memory - Only 840D Sl
- 57
  Read and Write PLC Variable - Only 840D Sl
- 60
  Access Protection Via Password and Keyswitch
- 62
  Password
- 63
  Keyswitch Positions (DB10, DBX56.4 to 7)
- 64
  Parameterizable Protection Levels
- 65
  Switching Over Motor/Drive Data Sets
- 65
  General Information
- 65
  Formatting Interfaces
- 66
  Request Interface
- 67
  Display Interface
- 67
  Example
- 68
  Overview of the Interfaces
- 69
  Supplementary Conditions
- 70
  Examples
- 70
  Parameter Set Changeover
- 72
  Data Lists
- 72
  Machine Data
- 72
  Display Machine Data
- 72
  Nc-Specific Machine Data
- 72
  Channelspecific Machine Data
- 72
  Axis/Spindlespecific Machine Data
- 74
  System Variables
- 74
  Signals
- 74
  Signals to NC
- 74
  Signals From NC
- 75
  Signals to Operator Panel Front
- 75
  Signals From Operator Panel Front
- 76
  Signals to Channel
- 76
  Signals From Channel
- 76
  Signals to Axis/Spindle
- 76
  Signals From Axis/Spindle
79
3 A3: Axis Monitoring, Protection Zones
- 79
  Brief Description
- 79
  Axis Monitoring Functions
- 79
  Protection Zones
- 80
  Axis Monitoring Functions
- 80
  Contour Monitoring
- 80
  Contour Error
- 80
  Following-Error Monitoring
- 83
  Positioning, Zero Speed and Clamping Monitoring
- 83
  Correlation Between Positioning, Zero-Speed and Clamping Monitoring
- 83
  Positioning Monitoring
- 84
  Zero-Speed Monitoring
- 85
  Parameter Set-Dependent Exact Stop and Standstill Tolerance
- 86
  Clamping Monitoring
- 93
  Speed-Setpoint Monitoring
- 94
  Actual-Velocity Monitoring
- 95
  Measuring System Monitoring
- 97
  Encoder-Limit-Frequency Monitoring
- 98
  Plausibility Check for Absolute Encoders
- 100
  Customized Error Reactions
- 103
  Limit-Switch Monitoring
- 103
  Hardware Limit Switch
- 104
  Software Limit Switch
- 106
  Monitoring of the Working Area Limitation
- 106
  General
- 108
  Working Area Limitation in BKS
- 110
  Working Area Limitation in WCS/SZS
- 113
  Parking a Machine Axis
- 115
  Parking the Passive Position Measuring System
- 115
  Function
- 118
  Supplementary Conditions
- 119
  Example: Changing an Attachment Head for a Direct Position Measuring System
- 123
  Example: Changing an Attachment Head for Two Direct Position Measuring Systems
- 127
  Example: Measuring System Switchover When Encoders Are Missing in Certain Parts of the Range
- 130
  Protection Zones
- 130
  General
- 132
  Types of Protection Zone
- 135
  Definition Via Part Program Instruction
- 138
  Definition As Per System Variable
- 140
  Activating and Deactivating Protection Zones
- 144
  Protection Zone Violation and Temporary Enabling of Individual Protection Zones
- 148
  Restrictions in Protection Zones
- 149
  Checking for Protection Zone Violation, Working Area Limitation and Software Limit Switches (CALCPOSI)
- 159
  Supplementary Conditions
- 159
  Axis Monitoring Functions
- 159
  Examples
- 159
  Working Area Limitation in WCS/SZS
- 162
  Protection Zones
- 162
  Definition and Activation of Protection Zones
- 171
  Data Lists
- 171
  Machine Data
- 171
  Nc-Specific Machine Data
- 172
  Channelspecific Machine Data
- 173
  Axis/Spindlespecific Machine Data
- 174
  Setting Data
- 174
  Axis/Spindlespecific Setting Data
- 174
  Signals
- 174
  Signals to Channel
- 175
  Signals From Channel
- 175
  Signals to Axis/Spindle
- 176
  Signals From Axis/Spindle

Siemens SINUMERIK 840D sl Function Manual (2050 pages)

Basic Machine

Brand: Siemens | Category: Control Unit | Size: 15.58 MB

9
Table of Contents
- 11
  Brief Description
- 13
  Detailed Description
- 15
  Ready Signals to PLC
- 16
  Alarm Signals to PLC
- 17
  Signals To/From Panel Front
- 19
  Signals to Channel
  - 29
    Signals From Axis/Spindle
  - 30
    Signals to Axis/Spindle (Digital Drives)
- 32
  Signals From Axis/Spindle (Digital Drives)
  - 35
    Functions
- 36
  Settings for Involute Interpolation
- 39
  Activate DEFAULT Memory
  - 41
    Supplementary Conditions
- 43
  Access Protection Via Password and Keyswitch
- 44
  Password
- 46
  Keyswitch Settings (DB10, DBX56.4 to 7)
- 47
  Parameterizable Protection Levels
  - 53
    Data Lists
  - 55
    Nc-Specific Machine Data
  - 56
    Channelspecific Machine Data
  - 57
    System Variables
- 58
  Signals to Channel
- 59
  Signals From Axis/Spindle
  - 60
    Signals to Operator Panel Front
  - 61
    Signals From Operator Panel Front
70
Brief Description 1
- 126
  Table 4-1 Part Program Excerpt for Protection Zone Definition
  - 137
    Axis/Spindlespecific Setting Data
  - 138
    5.3 Signals
  - 138
    Signals to Channel
  - 138
    Signals From Channel
  - 139
    Signals to Axis
  - 141
    Index
1674
Table of Contents
- - 1760
    General
  - 1760
    Toolholder With Orientation Capability
  - 1767
    Kinematic Interaction and Machine Design
  - 1775
    Inclined Machining With 3 + 2 Axes
  - 1776
    Machine With Rotary Table
  - 1779
    Procedure When Using Orientational Toolholders
  - 1784
    Programming
  - 1785
    Supplementary Conditions and Control System Response for Orientation
  - 1788
    G91 Extension
  - 1788
    Incrementally Programmed Compensation Values
  - 1790
    Machining in Direction of Tool Orientation
  - 1791
    Basic Tool Orientation
  - 1795
    Relevant Setting Data
  - 1795
    Special Handling of Tool Compensations
  - 1796
    Mirroring of Tool Lengths (SD 42900: MIRROR_TOOL_LENGTH)
  - 1797
    Mirroring of Wear Lengths (SD 42920: WEAR_SIGN_CUTPOS)
  - 1799
    Tool Length and Plane Change (SD 42940: TOOL_LENGTH_CONST)
  - 1800
    Tool Type (SD 42950: TOOL_LENGTH_TYPE)
  - 1801
    Temperature Offsets in the Tool Direction (SD 42960: TOOL_TEMP_COMP)
  - 1801
    Tool Lengths in the WCS Allowing for the Orientation
  - 1802
    Tool Length Offsets in Tool Direction
  - 1807
    General
  - 1807
    Sum Offsets and Setup Offsets
  - 1808
    Description of Function
  - 1811
    Activation
  - 1817
    Examples
  - 1818
    General
  - 1818
    Upgrades for Tool Length Determination
  - 1818
    Working With Tool Environments
  - 1819
    Saving With TOOLENV
  - 1821
    Delete Tool Environment
  - 1822
    How Many Environments and Which Ones Are Saved
  - 1823
    Read T, D, DL From a Tool Environment
  - 1824
    Read Tool Lengths, Tool Length Components
  - 1829
    Tool Lengths L1, L2, L3 Assignment: LENTOAX
- 1833
  3 Supplementary Conditions
  - 1833
    Flat D Number Structure
  - 1834
    SD42935 Expansions
  - 1835
    Examples
- 1849
  5 Data Lists
  - 1849
    Machine Data
  - 1849
    Nc-Specific Machine Data
  - 1850
    Channelspecific Machine Data
  - 1851
    Axis-/Spindlespecific Machine Data
  - 1852
    Setting Data
  - 1852
    Channelspecific Setting Data
  - 1853
    Signals
  - 1853
    Signals From Channel
  - 1855
    Index

Siemens SINUMERIK 840D sl Programming Manual (1334 pages)

NC programming

Brand: Siemens | Category: Control Unit | Size: 12.76 MB

Siemens SINUMERIK 840D sl Commissioning Manual (1734 pages)

Basesoftware and operating software

Brand: Siemens | Category: Control Unit | Size: 23.16 MB

- 1561
  Table of Contents
1565
1 Delivery Condition
- 1565
  PCU Base Software Windows 7
- 1565
  Overview
- 1566
  Supplied Software
- 1568
  Hardware Configuration of PCU 50.5
- 1568
  Network Settings
- 1568
  Partitioning of the SSD
- 1570
  Hardware Configuration of SIMATIC IPC
- 1570
  Network Settings
- 1570
  Partitioning of the SSD
- 1572
  Directory Structure and File Conventions
1573
2 First Commissioning of the PCU 50.5
- 1573
  Overview
- 1576
  Backing Up and Restoring the Delivery Condition
- 1577
  Install the PCU Base Software Attended
- 1578
  Unattended Installation of the PCU Base Software
- 1578
  Configuring an Answer File
- 1581
  Installing the PCU Base Software Attended
1583
3 First Commissioning of SIMATIC Ipcs
- 1583
  Overview
- 1584
  Adapting the Installation Settings
- 1585
  Installing the Pcu-Basesoftware
1587
4 Configuration of the System
- 1587
  Overview
- 1588
  Managing User Accounts
- 1589
  Changing the Name of the PC System
- 1590
  Setting the IP Address and Domain
- 1591
  Configuring USB Interfaces
- 1592
  Configuring Network Access On the USB Data Storage Medium
- 1593
  Configuring the Keyboard Layout
- 1594
  Setting Up an External Screen
- 1595
  Setting the Screen Resolution
- 1596
  Set the Resolution in the Tcu.ini
- 1600
  Setting the Color Depth in the Tcu.ini File
- 1601
  Activating/Deactivating the Multitouch Operation of Tcus
- 1602
  Calibrating the Touch Operation of a Screen
- 1603
  Configuring Virtual Direct Control Keys (VDCK)
- 1603
  General Information
- 1604
  Creating a Configuration File
- 1605
  Adapting the Layout of the Virtual Direct Control Keys
- 1606
  Default Setting for the Direct Control Key Layout
- 1606
  Reference to the Vdck.ini Configuration File
- 1610
  Configuring the SITOP UPS Module for Use With the PCU Base Software
- 1610
  Overview of SITOP UPS
- 1611
  SITOP Modules for the PCU 50.5
- 1612
  Configuring SITOP Software for PCU Base Software
- 1612
  Configuring SITOP Software V3.X (USB)
- 1617
  Configuring SITOP UPS Manager (Ethernet)
- 1618
  Hardware Configuration of the SITOP UPS Module
- 1621
  Configuration of the Service Center
- 1621
  Overview
- 1622
  Configuration of the Network Adapter
- 1623
  Configuration of the Host
- 1625
  Adapting the Firewall Settings
- 1625
  Overview
- 1626
  Factory Setting of the Windows Firewall On the Siemens PC System
- 1627
  General Information On the Operating Principle of the Windows Firewall
- 1628
  General Information On the Settings Recommended for Windows
- 1628
  Configuration By Means of a Prompt or Script/Batch File
- 1629
  Enabling SNMP Communication
- 1631
  Activate the Remote Access to the PC System
- 1631
  Overview
- 1631
  Via the Control Panel
- 1632
  By Prompt, Script or Batch File
- 1634
  Activation/Deactivation of the File and Printer Release
- 1634
  Overview
- 1635
  General Information
- 1636
  General Activation for All Network Profiles
- 1639
  Activation for a Specific Network Profile
- 1644
  Activation for a Specific Connection
- 1646
  Activation of the Ping Execution (ICMP)
- 1646
  Via the Control Panel
- 1647
  By Prompt, Script or Batch File
- 1648
  Saving and Restoring Firewall Settings
- 1648
  Overview
- 1649
  Backup of Firewall Settings
- 1650
  Restoring of Firewall Settings

Siemens SINUMERIK 840D sl Function Manual (990 pages)

Extended Functions

Brand: Siemens | Category: Industrial Equipment | Size: 5.86 MB

- 3
  Preface
- 9
  Table of Contents
27
1 Fundamental Safety Instructions
- 27
  General Safety Instructions
- 27
  Industrial Security
29
2 A4: Digital and Analog NC I/O for SINUMERIK 840D Sl
- 29
  Introduction
- 30
  Indirect I/O Access Via PLC
- 30
  Brief Description
- 31
  Parameterization
- 34
  System Variables
- 34
  Comparator Inputs
- 34
  Digital NC I/Os
- 34
  Digital Inputs
- 36
  Digital Outputs
- 39
  Connection and Logic Operations of Fast Digital I/Os
- 41
  Analog NC I/Os
- 41
  Analog Inputs
- 44
  Analog Outputs
- 48
  Representation of the Analog I/O Values
- 49
  Comparator Inputs
- 54
  Direct I/O Access Via PLC
- 54
  Parameterization
- 56
  Reading/Writing: System Variables
- 57
  Supplementary Conditions
- 57
  Examples
- 57
  Writing to Plc-I/Os
- 58
  Reading From Plc-I/Os
- 59
  Direct I/O Access Without PLC
- 59
  Brief Description
- 61
  Parameter Assignment
- 62
  Reading/Writing
- 62
  System Variables
- 64
  Bindings (Compile Cycles)
- 66
  Supplementary Conditions
- 66
  Examples
- 66
  Writing to the NC I/O
- 68
  Reading From the NC I/O
- 69
  Writing of the NC I/O With Status Query
- 71
  Data Lists
- 71
  Machine Data
- 71
  General Machine Data
- 72
  Channelspecific Machine Data
- 72
  Setting Data
- 72
  General Setting Data
- 72
  System Variable
- 73
  Signals
- 73
  Signals to NC
- 73
  Signals From NC

Siemens SINUMERIK 840D sl Function Manual (956 pages)

Extended Functions

Brand: Siemens | Category: Control Unit | Size: 8.59 MB

- 3
  Preface
- 7
  Table of Contents
25
1 A4: Digital and Analog NCK I/Os for SINUMERIK 840D Sl
- 25
  Introduction
- 27
  Access Via PLC
- 27
  Brief Description
- 28
  Configuration of the NCK I/Os
- 31
  NCK Digital Inputs/Outputs
- 31
  NCK Digital Inputs
- 32
  NCK Digital Outputs
- 35
  Connection and Logic Operations of Fast Digital NCK I/Os
- 37
  NCK Analog I/Os
- 37
  NCK Analog Inputs
- 39
  NCK Analog Outputs
- 43
  Representation of the NCK Analog Input/Output Values
- 45
  Comparator Inputs
- 48
  Direct PLC I/Os, Addressable From the NC
- 48
  Function
- 51
  Supplementary Conditions
- 52
  Examples
- 54
  Access Via PROFIBUS
- 54
  Brief Description
- 56
  Configuration of the I/O Ranges
- 58
  Data Exchange
- 58
  Communication Via Part Programs/Synchronous Actions
- 61
  Communication Via Compile Cycles
- 62
  Supplementary Conditions
- 63
  Examples
- 63
  PROFIBUS-I/O in Write Direction
- 65
  PROFIBUS-I/O in Read Direction
- 66
  Query of the Rangeindex in Case of "PROFIBUS-I/O in Write Direction
- 68
  Data Lists
- 68
  Machine Data
- 68
  General Machine Data
- 69
  Channelspecific Machine Data
- 69
  Setting Data
- 69
  General Setting Data
- 69
  Signals
- 69
  Signals to NC
- 70
  Signals From NC
71
2 B3: Distributed Systems - 840D Sl Only
- 71
  Brief Description
- 71
  Several Operator Panels On Several Ncus (T:M:N)
- 74
  NCU Link
- 74
  Link Communication
- 75
  Link Variables
- 75
  Link Axes
- 76
  Lead Link Axes
- 76
  Dependencies
- 77
  Application Example: Rotary Indexing Machine
- 79
  NCU Link
- 79
  Link Communication
- 79
  General Information
- 83
  Link Module
- 83
  Parameter Assignment: NC System Cycles
- 85
  Parameter Assignment: Link Communication
- 85
  Configuration
- 86
  Wiring the Ncus
- 86
  Activation
- 87
  Link Variables
- 88
  Properties of the Link Variables Memory
- 88
  Properties of the Link Variables
- 89
  Write Elements
- 90
  Dynamic Response During Write
- 90
  System Variable
- 91
  Synchronization of a Write Request
- 91
  Example: Structure of the Link Variables Memory
- 93
  Example: Read Drive Data
- 94
  Link Axes
- 94
  General Information
- 96
  Name of a Link Axis
- 96
  Parameterization
- 97
  Auxiliary Function Output for Spindles
- 98
  Supplementary Conditions
- 100
  Axis Container
- 100
  General Information
- 103
  Parameterization
- 110
  Programming
- 111
  System Variable
- 112
  Machining With Axis Container (Schematic)
- 113
  Behavior in Different Operating States
- 113
  Behavior When Withdrawing the Release for Axis Container Rotation
- 115
  Supplementary Conditions
- 118
  Lead Link Axes
- 118
  General Information
- 119
  Parameterization
- 120
  System Variables to Enter a Leading Value
- 121
  Supplementary Conditions
- 121
  Example
- 121
  System of Units Within a Link Group
- 122
  Examples
- 122
  Link Axis
- 123
  Axis Container Coordination
- 123
  Axis Container Rotation Without a Part Program Wait
- 124
  Axis Container Rotation With an Implicit Part Program Wait
- 124
  Axis Container Rotation By One Channel Only (E.g. During Power Up)
- 124
  Evaluating Axis Container System Variables
- 124
  Conditional Branch
- 124
  Static Synchronized Action With $AN_AXCTSWA
- 125
  Wait for Certain Completion of Axis Container Rotation
- 126
  Configuration of a Multi-Spindle Turning Machine
- 135
  Lead Link Axis
- 135
  Configuration
- 137
  Programming
- 138
  Data Lists
- 138
  Machine Data
- 138
  General Machine Data
- 138
  Channelspecific Machine Data
- 139
  Axis/Spindlespecific Machine Data
- 139
  Setting Data
- 139
  General Setting Data
- 139
  Axis/Spindle-Specific Setting Data
- 139
  Signals
- 139
  Signals From NC
- 140
  Signals From HMI/PLC
- 140
  General Online Interface
- 142
  Signals From Axis/Spindle
- 142
  System Variables

Siemens SINUMERIK 840D sl Operating Manual (940 pages)

Milling

Brand: Siemens | Category: Control Systems | Size: 7.59 MB

5
Preface
7
Table of Contents
7
Fundamental Safety
- 21
  Fundamental Safety Instructions
- 21
  General Safety Instructions
- 22
  Warranty and Liability for Application Examples
- 23
  Industrial Security
- 25
  Introduction
- 25
  Product Overview
- 26
  Operator Panel Fronts
- 26
  Overview
- 28
  Keys of the Operator Panel
- 36
  Machine Control Panels
- 36
  Overview
- 36
  Controls On the Machine Control Panel
- 40
  User Interface
- 40
  Screen Layout
- 41
  Status Display
- 43
  Actual Value Window
- 45
  T,F,S Window
- 47
  Current Block Display
- 49
  Operation Via Softkeys and Buttons
- 50
  Entering or Selecting Parameters
- 52
  Pocket Calculator
- 53
  Pocket Calculator Functions
- 55
  Context Menu
- 55
  Changing the User Interface Language
- 56
  Entering Chinese Characters
- 56
  Function - Input Editor
- 57
  Entering Asian Characters
- 59
  Editing the Dictionary
- 60
  Entering Korean Characters
- 63
  Protection Levels
- 64
  Online Help in SINUMERIK Operate
- 69
  Multitouch Operation With SINUMERIK Operate
- 69
  Multitouch Panels
- 70
  Touch-Sensitive User Interface
- 71
  Finger Gestures
- 74
  Multitouch User Interface
- 74
  Screen Layout
- 74
  Function Key Block
- 75
  Further Operator Touch Controls
- 76
  Virtual Keyboard
- 76
  Special "Tilde" Character
- 77
  Expansion With Side Screen
- 77
  Overview
- 77
  Sidescreen With Standard Windows
- 79
  Standard Widgets
- 79
  Actual Value" Widget
- 80
  Zero Point" Widget
- 80
  Alarms" Widget
- 80
  Axle Load" Widget
- 81
  Tool" Widget
- 81
  Service Life" Widget
- 82
  Program Runtime" Widget
- 82
  Sidescreen With Pages for the ABC Keyboard And/Or Machine Control Panel
- 83
  Example 1: ABC Keyboard in the Sidescreen
- 84
  Example 2: Machine Control Panel in the Sidescreen
- 85
  SINUMERIK Operate Display Manager (840D Sl Only)
- 85
  Overview
- 86
  Screen Layout
- 86
  Operator Controls
- 89
  Setting Up the Machine
- 89
  Switching On and Switching Off
- 90
  Approaching a Reference Point
- 90
  Referencing Axes
- 91
  User Agreement
- 93
  Operating Modes
- 93
  General
- 94
  Modes Groups and Channels
- 95
  Channel Switchover
- 96
  Settings for the Machine
- 96
  Switching Over the Coordinate System (MCS/WCS)
- 96
  Switching the Unit of Measurement
- 98
  Setting the Zero Offset
- 100
  Measure Tool
- 100
  Overview
- 100
  Manually Measuring Drilling and Milling Tools
- 101
  Measuring Drilling and Milling Tools With the Workpiece Reference Point
- 102
  Measuring Drilling and Milling Tools With Fixed Reference Point
- 103
  Measuring Radius or Diameter
- 104
  Fixed Point Calibration
- 104
  Measuring the Drilling and Milling Tool Length With Electrical Tool Probe
- 107
  Calibrating the Electrical Tool Probe
- 108
  Manually Measuring a Turning Tool (For Milling/Turning Machine)
- 109
  Manually Measuring a Turning Tool Using a Tool Probe (For Milling/Turning Machine)
- 111
  Logging Tool Measurement Results
- 113
  Measuring the Workpiece Zero
- 113
  Overview
- 117
  Sequence of Operations
- 118
  Examples With Manual Swivel
- 119
  Setting the Edge
- 121
  Edge Measurement
- 123
  Measuring a Corner
- 126
  Measuring a Pocket and Hole
- 129
  Measuring a Spigot
- 134
  Aligning the Plane
- 136
  Defining the Measurement Function Selection
- 137
  Corrections After Measurement of the Zero Point
- 138
  Logging Measurement Results for the Workpiece Zero
- 140
  Calibrating the Electronic Workpiece Probe
- 140
  Calibration of Length and Radius or Diameter
- 141
  Calibrate On Sphere
- 143
  Settings for the Measurement Result Log
- 145
  Zero Offsets
- 146
  Display Active Zero Offset
- 146
  Displaying the Zero Offset "Overview
- 148
  Displaying and Editing Base Zero Offset
- 149
  Displaying and Editing Settable Zero Offset
- 149
  Displaying and Editing Details of the Zero Offsets
- 151
  Deleting a Zero Offset
- 152
  Measuring the Workpiece Zero
- 153
  Monitoring Axis and Spindle Data
- 153
  Specify Working Area Limitations
- 153
  Editing Spindle Data
- 155
  Displaying Setting Data Lists
- 156
  Handwheel Assignment
- 158
  Mda
- 158
  Loading an MDA Program From the Program Manager
- 159
  Saving an MDA Program
- 160
  Editing/Executing a MDI Program
- 161
  Deleting an MDA Program
- 163
  Execution in Manual Mode
- 163
  General
- 164
  Selecting a Tool and Spindle
- 164
  T, S, M Windows
- 166
  Selecting a Tool
- 166
  Starting and Stopping a Spindle Manually
- 167
  Position Spindle
- 169
  Traversing Axes
- 169
  Traverse Axes By a Defined Increment
- 170
  Traversing Axes By a Variable Increment
- 171
  Positioning Axes
- 172
  Swiveling
- 177
  Manual Retraction
- 179
  Simple Face Milling of the Workpiece
- 182
  Simple Workpiece Machining Operations With Milling/Turning Machines
- 182
  Simple Workpiece Face Milling (Milling/Turning Machine)
- 184
  Simple Stock Removal of Workpiece (For Milling/Turning Machine)
- 188
  Default Settings for Manual Mode
- 189
  Machining the Workpiece
- 189
  Starting and Stopping Machining
- 191
  Selecting a Program
- 192
  Testing a Program
- 194
  Displaying the Current Program Block
- 194
  Current Block Display
- 195
  Displaying a Basic Block
- 196
  Display Program Level
- 198
  Correcting a Program
- 199
  Repositioning Axes
- 200
  Starting Machining at a Specific Point
- 200
  Use Block Search
- 202
  Continuing Program From Search Target
- 202
  Simple Search Target Definition
- 203
  Defining an Interruption Point As Search Target
- 203
  Entering the Search Target Via Search Pointer
- 204
  Parameters for Block Search in the Search Pointer
- 205
  Block Search Mode
- 207
  Block Search to a Position Pattern for Shopmill Programs
- 209
  Controlling the Program Run
- 209
  Program Control
- 210
  Skip Blocks
- 212
  Overstore
- 214
  Editing a Program
- 214
  Searching in Programs
- 216
  Replacing Program Text
- 217
  Copying/Pasting/Deleting a Program Block
- 219
  Renumbering a Program
- 219
  Creating a Program Block
- 221
  Opening Additional Programs
- 222
  Editor Settings
- 226
  Working With DXF Files
- 226
  Overview
- 226
  Displaying CAD Drawings
- 226
  Open a DXF File
- 226
  Cleaning a DXF File
- 227
  Enlarging or Reducing the CAD Drawing
- 228
  Changing the Section
- 228
  Rotating the View
- 229
  Displaying/Editing Information for the Geometric Data
- 230
  Importing and Editing a DXF File in the Editor
- 230
  General Procedure
- 230
  Specifying a Reference Point
- 231
  Assigning the Machining Plane
- 231
  Setting the Tolerance
- 231
  Selecting the Machining Range / Deleting the Range and Element
- 233
  Saving the DXF File
- 233
  Transferring the Drilling Positions
- 236
  Accepting Contours
- 239
  Display and Edit User Variables
- 239
  Overview
- 240
  Global R Parameters
- 241
  R Parameters
- 243
  Displaying Global User Data (GUD)
- 244
  Displaying Channel Guds
- 245
  Displaying Local User Data (LUD)
- 246
  Displaying Program User Data (PUD)
- 246
  Searching for User Variables
- 249
  Displaying G Functions and Auxiliary Functions
- 249
  Selected G Functions
- 251
  All G Functions
- 251
  G Functions for Mold Making
- 252
  Auxiliary Functions
- 254
  Displaying Superimpositions
- 257
  Mold Making View
- 257
  Overview
- 259
  Starting the Mold Making View
- 259
  Adapting the Mold Making View
- 260
  Specifically Jump to the Program Block
- 261
  Searching for Program Blocks
- 262
  Changing the View
- 262
  Enlarging or Reducing the Graphical Representation
- 263
  Moving and Rotating the Graphic
- 263
  Modifying the Viewport
- 265
  Displaying the Program Runtime and Counting Workpieces
- 267
  Setting for Automatic Mode
- 271
  Simulating Machining
- 271
  Overview
- 279
  Simulation before Machining of the Workpiece
- 280
  Simultaneous Recording before Machining of the Workpiece
- 281
  Simultaneous Recording During Machining of the Workpiece
- 282
  Different Views of the Workpiece
- 282
  Plan View
- 283
  View
- 283
  Side View
- 284
  Turning View
- 284
  Half Section
- 286
  Editing the Simulation Display
- 286
  Blank Display
- 286
  Showing and Hiding the Tool Path
- 287
  Program Control During the Simulation
- 287
  Changing the Feedrate
- 288
  Simulating the Program Block By Block
- 289
  Changing and Adapting a Simulation Graphic
- 289
  Enlarging or Reducing the Graphical Representation
- 290
  Panning a Graphical Representation
- 290
  Rotating the Graphical Representation
- 291
  Modifying the Viewport
- 291
  Defining Cutting Planes
- 293
  Displaying Simulation Alarms
- 295
  Generating a G Code Program
- 295
  Graphical Programming
- 296
  Program Views
- 300
  Program Structure
- 301
  Fundamentals
- 301
  Machining Planes
- 301
  Current Planes in Cycles and Input Screens
- 302
  Programming a Tool (T)
- 303
  Generating a G Code Program
- 304
  Blank Input
- 306
  Machining Plane, Milling Direction, Retraction Plane, Safe Clearance and Feedrate (PL, RP, SC, F)
- 307
  Selection of the Cycles Via Softkey
- 311
  Calling Technology Functions
- 311
  Hiding Cycle Parameters
- 311
  Setting Data for Cycles
- 311
  Checking Cycle Parameters
- 312
  Programming Variables
- 312
  Changing a Cycle Call
- 313
  Compatibility for Cycle Support
- 313
  Additional Functions in the Input Screens
- 315
  Measuring Cycle Support
- 317
  Creating a Shopmill Program
- 318
  Program Views
- 323
  Program Structure
- 324
  Fundamentals
- 324
  Machining Planes
- 324
  Polar Coordinates
- 325
  Absolute and Incremental Dimensions
- 327
  Creating a Shopmill Program
- 328
  Program Header
- 330
  Program Header (For Milling/Turning Machine)
- 333
  Generating Program Blocks
- 334
  Tool, Offset Value, Feed and Spindle Speed (T, D, F, S, V)
- 336
  Defining Machine Functions
- 338
  Call Work Offsets
- 339
  Repeating Program Blocks
- 341
  Specifying the Number of Workpieces
- 342
  Changing Program Blocks
- 343
  Changing Program Settings
- 345
  Selection of the Cycles Via Softkey
- 350
  Calling Technology Functions
- 350
  Additional Functions in the Input Screens
- 350
  Checking Input Parameters
- 350
  Setting Data for Technological Functions
- 351
  Changing a Cycle Call
- 351
  Programming Variables
- 352
  Compatibility for Cycle Support
- 353
  Measuring Cycle Support
- 354
  Example, Standard Machining
- 355
  Workpiece Drawing
- 355
  Programming
- 366
  Results/Simulation Test
- 368
  G Code Machining Program
- 371
  Programming Technological Functions (Cycles)
- 371
  Drilling
- 371
  General
- 372
  Centering (CYCLE81)
- 374
  Drilling (CYCLE82)
- 377
  Reaming (CYCLE85)
- 379
  Deep-Hole Drilling 1 (CYCLE83)
- 383
  Deep-Hole Drilling 2 (CYCLE830)
- 394
  Boring (CYCLE86)
- 396
  Tapping (CYCLE84, 840)
- 403
  Drill and Thread Milling (CYCLE78)
- 406
  Positioning and Position Patterns
- 408
  Arbitrary Positions (CYCLE802)
- 411
  Row Position Pattern (HOLES1)
- 412
  Grid or Frame Position Pattern (CYCLE801)
- 414
  Circle or Pitch Circle Position Pattern (HOLES2)
- 417
  Displaying and Hiding Positions
- 419
  Repeating Positions
- 420
  Face Milling (CYCLE61)
- 422
  Rectangular Pocket (POCKET3)
- 429
  Circular Pocket (POCKET4)
- 436
  Rectangular Spigot (CYCLE76)
- 441
  Circular Spigot (CYCLE77)
- 445
  Multi-Edge (CYCLE79)
- 449
  Longitudinal Groove (SLOT1)
- 455
  Circumferential Groove (SLOT2)
- 461
  Open Groove (CYCLE899)
- 469
  Long Hole (LONGHOLE) - Only for G Code Programs
- 471
  Thread Milling (CYCLE70)
- 475
  Engraving (CYCLE60)
- 481
  Contour Milling
- 481
  General
- 481
  Representation of the Contour
- 483
  Creating a New Contour
- 484
  Creating Contour Elements
- 489
  Changing the Contour
- 490
  Contour Call (CYCLE62) - Only for G Code Program
- 491
  Path Milling (CYCLE72)
- 496
  Contour Pocket/Contour Spigot (CYCLE63/64)
- 498
  Predrilling Contour Pocket (CYCLE64)
- 501
  Milling Contour Pocket (CYCLE63)
- 506
  Residual Material Contour Pocket (CYCLE63)
- 507
  Milling Contour Spigot (CYCLE63)
- 511
  Residual Material Contour Spigot (CYCLE63)
- 514
  Turning - Milling/Turning Machine
- 514
  General
- 514
  Stock Removal (CYCLE951)
- 518
  Groove (CYCLE930)
- 523
  Undercut Form E and F (CYCLE940)
- 529
  Thread Undercut (CYCLE940)
- 534
  Thread Turning (CYCLE99), Only for G Code
- 561
  Thread Chain (CYCLE98)
- 570
  Cut-Off (CYCLE92)
- 574
  Contour Turning - Milling/Turning Machine
- 574
  General Information
- 575
  Representation of the Contour
- 576
  Creating a New Contour
- 578
  Creating Contour Elements
- 584
  Changing the Contour
- 585
  Contour Call (CYCLE62)
- 586
  Stock Removal (CYCLE952)
- 599
  Stock Removal Residual (CYCLE952)
- 603
  Grooving (CYCLE952)
- 613
  Grooving Residual Material (CYCLE952)
- 617
  Plunge Turning (CYCLE952)
- 627
  Plunge Turning Residual Material (CYCLE952)
- 631
  Further Cycles and Functions
- 631
  Swivel Plane/Tool (CYCLE800)
- 641
  Swiveling Tool (CYCLE800)
- 641
  Swiveling Tool/Preloading Milling Tools - Only for G Code Program (CYCLE800)
- 642
  Aligning Turning Tools (CYCLE800) - Millling/Turning Machine
- 647
  High-Speed Settings (CYCLE832)
- 651
  Subroutines
- 653
  Additional Cycles and Functions in Shopmill
- 653
  Transformations
- 654
  Translation
- 655
  Rotation
- 656
  Scaling
- 656
  Mirroring
- 657
  Cylinder Surface Transformation
- 660
  Straight or Circular Machining
- 662
  Programming a Straight Line
- 663
  Programming a Circle With Known Center Point
- 664
  Programming a Circle With Known Radius
- 665
  Helix
- 666
  Polar Coordinates
- 667
  Straight Polar
- 668
  Circle Polar
- 669
  Obstacle
- 671
  Multi-Channel View
- 672
  Multi-Channel View in the "Machine" Operating Area
- 675
  Multi-Channel View for Large Operator Panels
- 677
  Setting the Multi-Channel View
- 679
  Collision Avoidance
- 681
  Activate Collision Avoidance
- 682
  Set Collision Avoidance
- 685
  Tool Management
- 685
  Lists for the Tool Management
- 687
  Magazine Management
- 688
  Tool Types
- 691
  Tool Dimensioning
- 698
  Tool List
- 701
  Additional Data
- 702
  Creating a New Tool
- 704
  Measuring the Tool
- 704
  Managing Several Cutting Edges
- 705
  Delete Tool
- 705
  Loading and Unloading Tools
- 707
  Selecting a Magazine
- 708
  Code Carrier Connection (Only 840D Sl)
- 710
  Managing a Tool in a File
- 713
  Tool Wear
- 715
  Reactivating a Tool
- 717
  Tool Data OEM
- 718
  Magazine
- 720
  Positioning a Magazine
- 720
  Relocating a Tool
- 721
  Deleting / Unloading / Loading / Relocating All Tools
- 723
  Tool Details
- 723
  Displaying Tool Details
- 723
  Tool Data
- 724
  Cutting Edge Data
- 726
  Monitoring Data
- 727
  Changing a Tool Type
- 728
  Graphic Display
- 730
  Sorting Tool Management Lists
- 731
  Filtering the Tool Management Lists
- 733
  Specific Search in the Tool Management Lists
- 735
  Settings for Tool Lists
- 737
  Working With Multitool
- 737
  Tool List for Multitool
- 738
  Create Multitool
- 740
  Equipping Multitool With Tools
- 741
  Removing a Tool From Multitool
- 742
  Deleting Multitool
- 742
  Loading and Unloading Multitool
- 743
  Reactivating the Multitool
- 744
  Relocating a Multitool
- 745
  Positioning a Multitool
- 747
  Managing Programs
- 747
  Overview
- 750
  NC Memory
- 750
  Local Drive
- 752
  USB Drives
- 752
  FTP Drive
- 754
  Opening and Closing the Program
- 756
  Executing a Program
- 758
  Creating a Directory / Program / Job List / Program List
- 758
  File and Directory Names
- 758
  Creating a New Directory
- 759
  Creating a New Workpiece
- 760
  Creating a New G Code Program
- 760
  Creating a New Shopmill Program
- 761
  Storing Any New File
- 762
  Creating a Job List
- 764
  Creating a Program List
- 765
  Creating Templates
- 766
  Searching Directories and Files
- 768
  Displaying the Program in the Preview
- 769
  Selecting Several Directories/Programs
- 771
  Copying and Pasting a Directory/Program
- 773
  Deleting a Program/Directory
- 774
  Changing File and Directory Properties
- 776
  Set Up Drives
- 776
  Overview
- 776
  Setting Up Drives
- 783
  Viewing PDF Documents
- 785
  Extcall
- 787
  Execution From External Memory (EES)
- 788
  Backing Up Data
- 788
  Generating an Archive in the Program Manager
- 789
  Generating an Archive Via the System Data
- 791
  Reading in an Archive in the Program Manager
- 792
  Read in Archive From System Data
- 794
  Setup Data
- 794
  Backing Up Setup Data
- 796
  Reading-In Set-Up Data
- 798
  Backing Up Parameters
- 801
  Rs-232-C
- 801
  Reading-In and Reading-Out Archives Via a Serial Interface
- 803
  Setting V24 in the Program Manager
- 805
  Multiple Clamping
- 806
  Program Header Setting, "Clamping
- 807
  Creating a Multiple Clamping Program
- 809
  Alarm, Error, and System Messages
- 809
  Displaying Alarms
- 810
  Machine
- 812
  Displaying an Alarm Log
- 813
  Displaying Messages
- 814
  Sorting, Alarms, Faults and Messages
- 815
  Creating Screenshots
- 816
  PLC and NC Variables
- 816
  Displaying and Editing PLC and NC Variables
- 820
  Saving and Loading Screen Forms
- 821
  Version
- 821
  Displaying Version Data
- 822
  Save Information
- 823
  Logbook
- 823
  Displaying and Editing the Logbook
- 824
  Making a Logbook Entry
- 826
  Remote Diagnostics
- 826
  Setting Remote Access
- 827
  Permit Modem
- 828
  Request Remote Diagnostics
- 829
  Exit Remote Diagnostics
- 831
  Working With Manual Machine
- 831
  Manual Machine
- 833
  Measuring the Tool
- 834
  Measuring the Workpiece Zero
- 835
  Setting the Zero Offset
- 836
  Set Limit Stop
- 837
  Simple Workpiece Machining
- 837
  Traversing Axes
- 838
  Angular Milling
- 839
  Straight and Circular Machining
- 839
  Straight Milling
- 840
  Circular Milling
- 842
  More Complex Machining
- 843
  Drilling With Manual Machine
- 844
  Milling With Manual Machine
- 845
  Contour Milling With Manual Machine
- 845
  Turning With Manual Machine - Milling/Turning Machine
- 847
  Simulation and Simultaneous Recording
- 849
  Teaching in a Program
- 849
  Overview
- 850
  General Sequence
- 851
  Inserting a Block
- 851
  Input Parameters for Teach-In Blocks
- 853
  Teach-In Via Window
- 853
  General
- 854
  Teach in Rapid Traverse G0
- 854
  Teach in Straight G1
- 854
  Teaching in Circle Intermediate and Circle End Point CIP
- 855
  Teach-In a Spline
- 857
  Editing a Block
- 858
  Selecting a Block
- 859
  Deleting a Block
- 860
  Settings for Teach-In
- 861
  HT 8 (840D Sl Only)
- 861
  HT 8 Overview
- 864
  Traversing Keys
- 865
  Machine Control Panel Menu
- 867
  Virtual Keyboard
- 869
  Calibrating the Touch Panel
- 871
  Ctrl-Energy
- 871
  Functions
- 872
  Ctrl-E Analysis
- 872
  Displaying Energy Consumption
- 873
  Displaying the Energy Analyses
- 874
  Measuring and Saving the Energy Consumption
- 875
  Tracking Measurements
- 876
  Tracking Usage Values
- 876
  Comparing Usage Values
- 877
  Long-Term Measurement of the Energy Consumption
- 879
  Ctrl-E Profiles
- 879
  Using the Energy-Saving Profile
- 881
  Easy Message (828D Only)
- 881
  Overview
- 882
  Activating Easy Message
- 883
  Creating/Editing a User Profile
- 885
  Setting-Up Events
- 887
  Logging an Active User On and Off
- 888
  Displaying SMS Logs
- 889
  Making Settings for Easy Message
- 891
  Easy Extend
- 891
  Overview
- 892
  Enabling a Device
- 893
  Activating and Deactivating a Device
- 894
  Initial Commissioning of Additional Devices
- 895
  Service Planner (828D Only)
- 895
  Performing and Monitoring Maintenance Tasks
- 897
  Edit PLC User Program (828D Only)
- 897
  Introduction
- 898
  Displaying and Editing PLC Properties
- 898
  Displaying PLC Properties
- 898
  Resetting the Processing Time
- 898
  Loading Modified PLC User Program
- 900
  Displaying and Editing PLC and NC Variables
- 905
  Displaying and Editing PLC Signals in the Status List
- 906
  View of the Program Blocks
- 906
  Displaying Information On the Program Blocks
- 907
  Structure of the User Interface
- 908
  Control Options
- 909
  Displaying the Program Status
- 910
  Changing the Address Display
- 910
  Enlarging/Reducing the Ladder Diagram
- 911
  Program Block
- 911
  Displaying and Editing the Program Block
- 912
  Displaying Local Variable Table
- 912
  Creating a Program Block
- 914
  Opening a Program Block in the Window
- 914
  Displaying/Canceling the Access Protection
- 915
  Editing Block Properties Subsequently
- 915
  Editing a Program Block
- 915
  Editing the PLC User Program
- 916
  Editing a Program Block
- 918
  Deleting a Program Block
- 918
  Inserting and Editing Networks
- 919
  Editing Network Properties
- 920
  Displaying the Network Symbol Information Table
- 921
  Displaying Symbol Tables
- 922
  Displaying Cross References
- 923
  Searching for Operands
- 925
  Appendix
- 925
  840D Sl / 828D Documentation Overview
- 927
  Index

Siemens SINUMERIK 840D sl Operating Manual (942 pages)

Brand: Siemens | Category: Control Unit | Size: 8.81 MB

- 5
  Preface
- 9
  Table of Contents
23
1 Fundamental Safety Instructions
- 23
  General Safety Instructions
- 24
  Warranty and Liability for Application Examples
- 25
  Industrial Security
- 27
  Introduction
  - 27
    Product Overview
  - 28
    Operator Panel Fronts
  - 28
    Overview
  - 30
    Keys of the Operator Panel
  - 38
    Machine Control Panels
  - 38
    Overview
  - 38
    Controls On the Machine Control Panel
  - 42
    User Interface
  - 42
    Screen Layout
  - 43
    Status Display
  - 45
    Actual Value Window
  - 47
    T,F,S Window
  - 48
    Current Block Display
  - 50
    Operation Via Softkeys and Buttons
  - 51
    Entering or Selecting Parameters
  - 53
    Pocket Calculator
  - 54
    Pocket Calculator Functions
  - 56
    Context Menu
  - 57
    Changing the User Interface Language
  - 57
    Entering Chinese Characters
  - 57
    Function - Input Editor
  - 59
    Entering Asian Characters
  - 60
    Editing the Dictionary
  - 62
    Entering Korean Characters
  - 64
    Protection Levels
  - 66
    Cleaning Mode
  - 66
    Display Live Image From a Camera
  - 67
    Online Help in SINUMERIK Operate
71
3 Multitouch Operation With SINUMERIK Operate
- 71
  Multitouch Panels
- 72
  Touch-Sensitive User Interface
- 73
  Finger Gestures
- 76
  Multitouch User Interface
- 76
  Screen Layout
- 76
  Function Key Block
- 77
  Further Operator Touch Controls
- 78
  Virtual Keyboard
- 78
  Special "Tilde" Character
- 79
  Expansion With Side Screen
- 79
  Overview
- 79
  Sidescreen With Standard Windows
- 81
  Standard Widgets
- 81
  Actual Value" Widget
- 82
  Zero Point" Widget
- 82
  Alarms" Widget
- 82
  NC/PLC Variables" Widget
- 83
  Axle Load" Widget
- 83
  Tool" Widget
- 84
  Service Life" Widget
- 84
  Program Runtime" Widget
- 84
  Widget "Camera 1" and "Camera 2
- 85
  Sidescreen With Pages for the ABC Keyboard And/Or Machine Control Panel
- 86
  Example 1: ABC Keyboard in the Sidescreen
- 87
  Example 2: Machine Control Panel in the Sidescreen
- 88
  SINUMERIK Operate Display Manager (840D Sl Only)
- 88
  Overview
- 89
  Screen Layout
- 89
  Operator Controls

Siemens SINUMERIK 840D sl Operating Manual (894 pages)

Brand: Siemens | Category: Control Panel | Size: 8.61 MB

4
Instructions
5
Preface
- 7
  Fundamental Safety
- 21
  Fundamental Safety Instructions
- 21
  General Safety Instructions
- 22
  Industrial Security
- 23
  Introduction
- 23
  Product Overview
- 24
  Operator Panel Fronts
- 24
  Overview
- 26
  Keys of the Operator Panel
- 33
  Controls On the Machine Control Panel
- 33
  Machine Control Panels
- 33
  Overview
- 37
  Screen Layout
- 37
  User Interface
- 38
  Status Display
- 40
  Actual Value Window
- 42
  T,F,S Window
- 43
  Current Block Display
- 45
  Operation Via Softkeys and Buttons
- 46
  Entering or Selecting Parameters
- 49
  Context Menu
- 49
  Pocket Calculator
- 50
  Touch Operation
- 51
  Changing the User Interface Language
- 51
  Entering Chinese Characters
- 51
  Function - Input Editor
- 53
  Entering Asian Characters
- 54
  Editing the Dictionary
- 56
  Entering Korean Characters
- 58
  Protection Levels
- 60
  Online Help in SINUMERIK Operate
- 63
  Multitouch Panels
- 63
  Operating With Gestures
- 64
  Finger Gestures
- 64
  Touch-Sensitive User Interface
- 67
  Setting Up the Machine
- 67
  Switching On and Switching Off
- 68
  Approaching a Reference Point
- 68
  Referencing Axes
- 69
  User Agreement
- 70
  General
- 70
  Modes and Mode Groups
- 72
  Channel Switchover
- 72
  Modes Groups and Channels
- 73
  Settings for the Machine
- 73
  Switching Over the Coordinate System (MCS/WCS)
- 74
  Switching the Unit of Measurement
- 75
  Setting the Zero Offset
- 77
  Measuring the Tool
- 78
  Measuring a Tool Manually
- 80
  Measuring a Tool With a Tool Probe
- 81
  Calibrating the Tool Probe
- 82
  Measuring a Tool With a Magnifying Glass
- 83
  Logging Tool Measurement Results
- 84
  Measuring the Workpiece Zero
- 86
  Logging Measurement Results for the Workpiece Zero
- 87
  Settings for the Measurement Result Log
- 88
  Zero Offsets
- 89
  Display Active Zero Offset
- 90
  Displaying the Zero Offset "Overview
- 91
  Displaying and Editing Base Zero Offset
- 92
  Displaying and Editing Settable Zero Offset
- 93
  Displaying and Editing Details of the Zero Offsets
- 94
  Deleting a Zero Offset
- 95
  Measuring the Workpiece Zero
- 96
  Editing Spindle Data
- 96
  Monitoring Axis and Spindle Data
- 96
  Specify Working Area Limitations
- 97
  Spindle Chuck Data
- 100
  Displaying Setting Data Lists
- 100
  Handwheel Assignment
- 102
  Loading an MDA Program From the Program Manager
- 102
  Mda
- 103
  Saving an MDA Program
- 104
  Editing/Executing a MDI Program
- 105
  Deleting an MDA Program
- 107
  General
- 107
  Selecting a Tool and Spindle
- 107
  T,S,M Window
- 107
  Working in Manual Mode
- 109
  Selecting a Tool
- 110
  Positioning the Spindle
- 110
  Starting and Stopping the Spindle Manually
- 111
  Traverse Axes By a Defined Increment
- 111
  Traversing Axes
- 112
  Traversing Axes By a Variable Increment
- 113
  Manual Retraction
- 113
  Positioning Axes
- 114
  Simple Stock Removal of Workpiece
- 117
  Thread Synchronizing
- 118
  Default Settings for Manual Mode
- 121
  Machining the Workpiece
- 121
  Starting and Stopping Machining
- 122
  Selecting a Program
- 123
  Executing a Trail Program Run
- 124
  Current Block Display
- 124
  Displaying the Current Program Block
- 126
  Display Program Level
- 126
  Displaying a Basic Block
- 127
  Correcting a Program
- 128
  Repositioning Axes
- 129
  Starting Machining at a Specific Point
- 129
  Use Block Search
- 131
  Continuing Program From Search Target
- 131
  Simple Search Target Definition
- 132
  Defining an Interruption Point As Search Target
- 133
  Entering the Search Target Via Search Pointer
- 134
  Parameters for Block Search in the Search Pointer
- 135
  Block Search Mode
- 137
  Block Search for Position Pattern for Shopturn Programs
- 138
  Controlling the Program Run
- 138
  Program Control
- 139
  Skip Blocks
- 140
  Overstore
- 141
  Editing a Program
- 142
  Searching in Programs
- 144
  Replacing Program Text
- 145
  Copying/Pasting/Deleting a Program Block
- 147
  Creating a Program Block
- 147
  Renumbering a Program
- 149
  Opening Additional Programs
- 150
  Editor Settings
- 153
  Displaying CAD Drawings
- 153
  Open a DXF File
- 153
  Overview
- 153
  Working With DXF Files
- 154
  Cleaning a DXF File
- 154
  Enlarging or Reducing the CAD Drawing
- 155
  Changing the Section
- 156
  Displaying/Editing Information for the Geometric Data
- 156
  Rotating the View
- 157
  General Procedure
- 157
  Importing and Editing a DXF File in the Editor
- 157
  Specifying a Reference Point
- 158
  Assigning the Machining Plane
- 159
  Selecting the Machining Range / Deleting the Range and Element
- 159
  Setting the Tolerance
- 160
  Saving the DXF File
- 161
  Transferring the Drilling Positions
- 164
  Accepting Contours
- 166
  Display and Edit User Variables
- 166
  Overview
- 167
  Global R Parameters
- 168
  R Parameters
- 170
  Displaying Global User Data (GUD)
- 171
  Displaying Channel Guds
- 172
  Displaying Local User Data (LUD)
- 173
  Displaying Program User Data (PUD)
- 174
  Searching for User Variables
- 175
  Displaying G Functions and Auxiliary Functions
- 175
  Selected G Functions
- 177
  All G Functions
- 178
  G Functions for Mold Making
- 179
  Auxiliary Functions
- 180
  Displaying Superimpositions
- 182
  Mold Making View
- 185
  Adapting the Mold Making View
- 185
  Starting the Mold Making View
- 186
  Specifically Jump to the Program Block
- 187
  Searching for Program Blocks
- 188
  Changing the View
- 188
  Enlarging or Reducing the Graphical Representation
- 189
  Modifying the Viewport
- 189
  Moving and Rotating the Graphic
- 190
  Displaying the Program Runtime and Counting Workpieces
- 192
  Setting for Automatic Mode
- 195
  Overview
- 195
  Simulating Machining
- 200
  Simulation before Machining of the Workpiece
- 201
  Simultaneous Recording before Machining of the Workpiece
- 202
  Different Views of the Workpiece
- 202
  Simultaneous Recording During Machining of the Workpiece
- 203
  Half Section
- 203
  Side View
- 204
  Face View
- 204
  View
- 205
  2-Window
- 205
  Graphical Display
- 206
  Blank Display
- 206
  Editing the Simulation Display
- 207
  Showing and Hiding the Tool Path
- 208
  Changing the Feedrate
- 208
  Program Control During the Simulation
- 209
  Simulating the Program Block By Block
- 210
  Editing and Adapting a Simulation Graphic
- 210
  Enlarging or Reducing the Graphical Representation
- 211
  Panning a Graphical Representation
- 211
  Rotating the Graphical Representation
- 212
  Defining Cutting Planes
- 212
  Modifying the Viewport
- 213
  Displaying Simulation Alarms
- 215
  Creating a G Code Program
- 215
  Graphical Programming
- 215
  Program Views
- 219
  Program Structure
- 220
  Fundamentals
- 220
  Machining Planes
- 221
  Current Planes in Cycles and Input Screens
- 221
  Programming a Tool (T)
- 222
  Generating a G Code Program
- 223
  Blank Input
- 225
  Machining Plane, Milling Direction, Retraction Plane, Safe Clearance and Feedrate (PL, RP, SC, F)
- 226
  Selection of the Cycles Via Softkey
- 230
  Calling Technology Cycles
- 230
  Hiding Cycle Parameters
- 231
  Checking Cycle Parameters
- 231
  Programming Variables
- 231
  Setting Data for Cycles
- 232
  Additional Functions in the Input Screens
- 232
  Changing a Cycle Call
- 232
  Compatibility for Cycle Support
- 233
  Measuring Cycle Support
- 235
  Creating a Shopturn Program
- 235
  Graphic Program Control, Shopturn Programs
- 235
  Program Views
- 240
  Program Structure
- 241
  Fundamentals
- 241
  Machining Planes
- 243
  Machining Cycle, Approach/Retraction
- 245
  Absolute and Incremental Dimensions
- 247
  Polar Coordinates
- 248
  Clamping the Spindle
- 248
  Creating a Shopturn Program
- 250
  Program Header
- 253
  Generating Program Blocks
- 253
  Tool, Offset Value, Feedrate and Spindle Speed (T, D, F, S, V)
- 256
  Call Work Offsets
- 257
  Repeating Program Blocks
- 258
  Entering the Number of Workpieces
- 259
  Changing Program Blocks
- 260
  Changing Program Settings
- 261
  Selection of the Cycles Via Softkey
- 266
  Additional Functions in the Input Screens
- 266
  Calling Technology Functions
- 266
  Checking Cycle Parameters
- 267
  Changing a Cycle Call
- 267
  Programming Variables
- 267
  Setting Data for Technological Functions
- 268
  Compatibility for Cycle Support
- 268
  Programming the Approach/Retraction Cycle
- 270
  Example: Standard Machining
- 270
  Measuring Cycle Support
- 272
  Programming
- 272
  Workpiece Drawing
- 284
  Results/Simulation Test
- 286
  G Code Machining Program
- 289
  Drilling
- 289
  General
- 289
  Programming Technology Functions (Cycles)
- 290
  Centering (CYCLE81)
- 292
  Drilling (CYCLE82)

Siemens SINUMERIK 840D sl Operating Manual (926 pages)

Computerized Numerical Controller for machine tools

Brand: Siemens | Category: Controller | Size: 9.33 MB

- 5
  Preface
- 9
  Table of Contents
23
1 Fundamental Safety Instructions
- 23
  General Safety Instructions
- 24
  Industrial Security
25
2 Introduction
- 25
  Product Overview
- 26
  Operator Panel Fronts
- 26
  Overview
- 27
  Keys of the Operator Panel
- 37
  Machine Control Panels
- 37
  Overview
- 37
  Controls On the Machine Control Panel
- 41
  User Interface
- 41
  Screen Layout
- 42
  Status Display
- 45
  Actual Value Window
- 47
  T,F,S Window
- 49
  Current Block Display
- 49
  Operation Via Softkeys and Buttons
- 51
  Entering or Selecting Parameters
- 53
  Pocket Calculator
- 54
  Context Menu
- 54
  Touch Operation
- 55
  Changing the User Interface Language
- 55
  Entering Chinese Characters
- 55
  Function - Input Editor
- 57
  Entering Asian Characters
- 58
  Editing the Dictionary
- 60
  Entering Korean Characters
- 62
  Protection Levels
- 64
  Online Help in SINUMERIK Operate
67
3 Setting Up the Machine
- 67
  Switching On and Switching Off
- 68
  Approaching a Reference Point
- 68
  Referencing Axes
- 69
  User Agreement
- 70
  Modes and Mode Groups
- 70
  General
- 72
  Modes Groups and Channels
- 73
  Channel Switchover
- 74
  Settings for the Machine
- 74
  Switching Over the Coordinate System (MCS/WCS)
- 75
  Switching the Unit of Measurement
- 76
  Setting the Zero Offset
- 78
  Measuring the Tool
- 78
  Measuring a Tool Manually
- 80
  Measuring a Tool With a Tool Probe
- 82
  Calibrating the Tool Probe
- 83
  Measuring a Tool With a Magnifying Glass
- 84
  Logging Tool Measurement Results
- 85
  Measuring the Workpiece Zero
- 87
  Logging Measurement Results for the Workpiece Zero
- 88
  Settings for the Measurement Result Log
- 90
  Zero Offsets
- 91
  Display Active Zero Offset
- 92
  Displaying the Zero Offset "Overview
- 93
  Displaying and Editing Base Zero Offset
- 94
  Displaying and Editing Settable Zero Offset
- 95
  Displaying and Editing Details of the Zero Offsets
- 97
  Deleting a Zero Offset
- 97
  Measuring the Workpiece Zero
- 98
  Monitoring Axis and Spindle Data
- 98
  Specify Working Area Limitations
- 99
  Editing Spindle Data
- 100
  Spindle Chuck Data
- 102
  Displaying Setting Data Lists
- 103
  Handwheel Assignment
- 105
  Mda
- 105
  Loading an MDA Program From the Program Manager
- 106
  Saving an MDA Program
- 107
  Editing/Executing a MDI Program
- 108
  Deleting an MDA Program

Siemens SINUMERIK 840D sl Function Manual (795 pages)

Special Functions

Brand: Siemens | Category: Control Systems | Size: 6.08 MB

Siemens SINUMERIK 840D sl Commissioning Manual (1102 pages)

Basesoftware and operating software

Brand: Siemens | Category: Control Unit | Size: 12.35 MB

11
Table of Contents
- 21
  System Overview
  - 22
    System Requirements
- 23
  Principles of Start-Up
  - 26
    Editing Files
- 29
  Editing a File Externally
- 31
  Licensing
- 37
  Creating Drive Connections
  - 40
    File "Logdrive.ini
- 45
  Channel Menu
  - 46
    Constraints
  - 48
    Defining Channel Groups in the "Netnames.ini" File
  - 49
    Configuring Operating Stations in the "Config.ini" File
  - 51
    Example: Settings for 1:N
  - 53
    Distribution Via Job Lists in the Case of 1:N
  - 57
    General Settings
  - 58
    Set Date/Time
  - 61
    Configuring Caps Lock
  - 62
    Darken Screen
  - 63
    Switching EXTCALL Off
  - 64
    Modifying the Access Levels Password
  - 65
    Access Levels for Programs
  - 68
    Access Rights for Files
  - 69
    This Is How You Define New Access Levels for Softkeys
    - 71
      HMI Monitor
    - 72
      Program Selection
- 75
  Machine and Setting Data
  - 78
    Displaying/Editing Display Machine Data
  - 79
    Displaying/Editing Setting Data
  - 80
    Displaying/Editing Drive Parameters
  - 82
    Machine Data Display Filter
  - 84
    Editing Machine Data and Drive Parameters
  - 85
    Editing BICO Values
    - 86
      Searching for Data
    - 87
      Managing Data
    - 90
      User Views
  - 91
    Creating a User View
  - 92
    Editing the User View
  - 94
    Deleting a User View
    - 95
      Plain Texts for Machine and Setting Data
    - 97
      Setting the Font Size of the Actual Value Display
    - 98
      Inserting a User-Specific Logo
    - 100
      Configuring the Channel Operational Message
    - 103
      Deactivating Program Test
    - 105
      Block Search
    - 106
      Multi-Channel Support
    - 107
      Manual Machine
    - 110
      User Status Display (OEM)
  - 115
    Simulation and Simultaneous Recording
    - 117
      Configuring the Simulation
    - 120
      Reset NCK Data for the Simulation
    - 122
      Clamping a Blank
- 125
  Spindle Functions
  - 127
    Analog Spindle
  - 129
    Drive System
- 131
  Tool Management
  - 133
    Configuring the Access Levels of the Tool Management

Siemens SINUMERIK 840D sl Manuals

Table of Contents

35 1 A2: Various NC/PLC Interface Signals and Functions

77 2 A3: Axis Monitoring, Protection Zones

Table of Contents

33 1 Fundamental Safety Instructions

35 2 A2: Various NC/PLC Interface Signals and Functions

79 3 A3: Axis Monitoring, Protection Zones

Table of Contents

9 Table of Contents

70 Brief Description 1

1674 Table of Contents

1833 3 Supplementary Conditions

1849 5 Data Lists

Table of Contents

Table of Contents

1565 1 Delivery Condition

1573 2 First Commissioning of the PCU 50.5

1583 3 First Commissioning of SIMATIC Ipcs

1587 4 Configuration of the System

Table of Contents

27 1 Fundamental Safety Instructions

29 2 A4: Digital and Analog NC I/O for SINUMERIK 840D Sl

Table of Contents

25 1 A4: Digital and Analog NCK I/Os for SINUMERIK 840D Sl

71 2 B3: Distributed Systems - 840D Sl Only

Table of Contents

Table of Contents

23 1 Fundamental Safety Instructions

71 3 Multitouch Operation With SINUMERIK Operate

Table of Contents

Table of Contents

23 1 Fundamental Safety Instructions

25 2 Introduction

67 3 Setting Up the Machine

Table of Contents

23 1 F2: Multi-Axis Transformations

Table of Contents

11 Table of Contents

35
1 A2: Various NC/PLC Interface Signals and Functions

77
2 A3: Axis Monitoring, Protection Zones

33
1 Fundamental Safety Instructions

35
2 A2: Various NC/PLC Interface Signals and Functions

79
3 A3: Axis Monitoring, Protection Zones

9
Table of Contents

70
Brief Description 1

1674
Table of Contents

1833
3 Supplementary Conditions

1849
5 Data Lists

1565
1 Delivery Condition

1573
2 First Commissioning of the PCU 50.5

1583
3 First Commissioning of SIMATIC Ipcs

1587
4 Configuration of the System

27
1 Fundamental Safety Instructions

29
2 A4: Digital and Analog NC I/O for SINUMERIK 840D Sl

25
1 A4: Digital and Analog NCK I/Os for SINUMERIK 840D Sl

71
2 B3: Distributed Systems - 840D Sl Only

23
1 Fundamental Safety Instructions

71
3 Multitouch Operation With SINUMERIK Operate

23
1 Fundamental Safety Instructions

25
2 Introduction

67
3 Setting Up the Machine

23
1 F2: Multi-Axis Transformations

11
Table of Contents