Device configuration
4.1
Configurable user interface
PC systems
For PC systems with WinCC RT Advanced, the complete user interface is available for
configuring screens for an additional operating area of a SINUMERIK Operate user interface.
Because you do no select a specific operator panel front for the configuration of a PC
system, all available function keys are basically displayed on the added screens.
You can specifically set the screen resolution (Page 51) of the operator panel front and also
subsequently change it.
Figure 4-1
When you configure the function keys, make sure you only use the keys that are actually
available on the operator panel front.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
User interface of a screen for configuration of the PCU 50.5
4
43