Note
"Special handling of tool compensations" pays particular attention to tool compensations with
evaluation of sign for tool length with wear and temperature fluctuations.
The following are taken into account:
•
•
•
2.8
Special handling of tool compensations
2.8
2.8.1
Relevant setting data
SD42900-42960
Setting data SD42900-SD42940 can be used to make the following settings with reference to
tool compensation:
• Sign of the tool length
• Sign of the wear
• Behavior of the wear components when mirroring geometry axes
• Behavior of the wear components when changing the machining plane via setting data
• Allocation of the tool length components independent of actual tool type
• Transformation of wear components into a suitable coordinate system for controlling the
Note
In the following description, the wear includes the total values of the following components:
•
•
Tool Compensation (W1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Tool type
Transformations for tool components
Assignment of tool length components to geometry axes independently of tool type
effective tool length
Wear values: $TC_DP12 to $TC_DP20
Sum offset, consisting of:
– Wear values: $SCPX3 to $SCPX11
Setup values: $ECPX3 to $ECPX11
–
2.8 Special handling of tool compensations
Detailed Description
2-115