Displaying Machine Data And Parameters - Siemens SINUMERIK 840D sl Commissioning Manual

Safety Integrated
21.1

Displaying machine data and parameters

21.1.1 View of the axes
You can display the Safety Integrated axes in the "Machine Configuration" window.
Copying and confirming Safety Integrated data
You can copy and confirm Safety Integrated data.
Activating and deactivating the start-up of the Safety Integrated drives
You have the possibility of activating and deactivating Safety Integrated drives.
The Safety commissioning mode in the drives is activated.
References
Further information is available in the Safety Integrated 840D sl Function Manual
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1. Select the "Start-up" operating area.
2. Press the menu forward key and the "Safety" softkey.
The "Machine Configuration Safety Axes" window opens.
All of the safety axes are displayed.
3. Press the "All axes" softkey if you wish to display all of the axes.
The "All Axes Machine Configuration" window opens and the "All axes"
softkey changes into "Safety axes".
4. Press the "Safety axes" softkey in order to return to the view of the
safety axes.
21
431