New mirroring
Parameter
Mirroring
X
Y
Z
10.7.6
Cylinder surface transformation
You require the cylinder surface transformation to machine
● Longitudinal grooves on cylindrical bodies,
● Transverse grooves on cylindrical objects
● grooves with any path on cylindrical bodies.
The path of the grooves is programmed with reference to the unwrapped, level surface of the
cylinder. The groove can be programmed using line/circle, drilling or milling cycles or with
contour milling (free contour programming).
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Description
● New
New mirroring
● Additive
Additive mirroring
Mirroring of the X axis, on/off
Mirroring of the Y axis, on/off
Mirroring of the Z axis, on/off
Programming technological functions (cycles)
10.7 Additional cycles and functions in ShopMill
Additive mirroring
Unit
657