Auxiliary Functions - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
6.13 Displaying G Functions and Auxiliary Functions
References
● Additional information is available in the following references:
Function Manual, Basic Functions; Chapter, "Contour/orientation tolerance"
● For information about configuring the displayed G groups, refer to the following document:
SINUMERIK Operate Commissioning Manual
Procedure
6.13.4

Auxiliary functions

Auxiliary functions include M and H functions preprogrammed by the machine manufacturer,
which transfer parameters to the PLC to trigger reactions defined by the manufacturer.
Displayed auxiliary functions
Up to five current M functions and three H functions are displayed in the "Auxiliary Functions"
window.
214
1. Select the "Machine" operating area
2. Press the <JOG>, <MDI> or <AUTO> key.
3. Press the ">>" and "All G functions" softkeys.
The "G Functions" window is opened.
Operating Manual, 05/2017, A5E40868956
Milling