Remedy: Check Parameter - Siemens SINUMERIK 840D sl Series Diagnostics Manual

08/2005
61356
Channel %1 Block %2: File for logfile is being used
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
The log file is already used by an NC program.
Remedy: Check parameter _PROTNAME[1].
61357
Channel %1 Block %2: No resources free
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
Not enough NC memory space available.
Reactions: - Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Remedy: Delete the files.
Program Con- Clear alarm with the RESET key. Restart part program
tinuation:
61358
Channel %1 Block %2: Error during recording
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
Internal error
Remedy: Call the hotline!
61359
Channel %1 Block %2: - continue with RESET
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
Internal error
Remedy: Call the hotline!
61360
Channel %1 Block %2: Log job undefined - continue with RESET
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: Alarm triggered by following cycle: CYCLE106.
Cycle CYCLE106 was called by an incorrect parameter.
Remedy: Check cycle call for CYCLE106, specifically the call parameter.
61361
Channel %1 Block %2: Variable cannot be recorded
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE105.
The value specified in _PROTVAL[] cannot be logged.
Remedy: Check parameter _PROTVAL[].
61362
Channel %1 Block %2: Cycle118: No. of values too large
Parameters: %1 = Channel number
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-487