Insert Usb Flash Drive In Target Device; Prepare Operation With Pc Mouse - Siemens SINUMERIK 840D sl Commissioning Manual

Requirements for the upgrade

3.4 Prepare operation with PC mouse

Note
*.tgz files from data backup folders can be used with functional limitations
The *.tgz files that exist in the data backup folders can be used with suitable means, e.g. service
system, bootable USB stick, but with functional limitations.
3.3

Insert USB flash drive in target device

To connect the USB flash drive to the target device, proceed as follows:
1. Insert the USB flash drive into a USB interface of the NCU (X125 or X135).
2. Switch on the machine.
Figure 3-2
3.4 Prepare operation with PC mouse
In general, you can operate the SINUMERIK Software Update Tool with the keys on the
operator panel (HSKs, cursor keys, SELECT, tabulator key, etc.).
18
USB interface on NCU
SINUMERIK Software Update Tool
Commissioning Manual, 03/2018, A5E42187770B AA