2.7
Defining the standard directory
You can select one of the set up drives as the connection for the standard directory.
You can define the drive as follows:
● In the display machine data MD9005 $MM_PRG_DEFAULT_DIR.
● Via the user interface of HMI-Embedded.
Setting in the display machine data.
Use the Select key to select all created drive connections (1 to max. 8).
Setting via the user interface of HMI-Embedded
1. Press the vertical softkey "Settings".
2. Press the vertical softkey "Program Overview". All created drives will be shown.
3. Select a drive with the Select key.
4. Press the "OK" softkey. The drive is saved.
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
Configuring the HMI system
2.7 Defining the standard directory
31