Methods Syntax; Press Method - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning cnc part 2 (hmi)

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Expanding the Operator Interface (BE1)

Screen form elements and displays

More information about defining variables for one or more screen form elements

and all relevant information about display building appears in "Syntax for screen

form definition".

3.5 Methods syntax

Various types of event (exit input field, actuate softkey) can initiate particular

actions in screen forms and screen-form-dependent softkey menus (softkey menus,

which are called from a newly configured screen form). These actions are

configured in methods.

The following table shows the basic principle used to configure a method:

- Functions,

see Section 3.6 "Functions"

- Change properties

see Subsection 3.4.2, "Defining a

softkey" and Subsection 3.3.3,

"Screen form elements"

- Calculate with variables

see Subsection 3.3.3, "Screen form

End of method

The following methods can be configured in a screen form:

The PRESS method is executed when the corresponding softkey is pressed, see

PRESS method softkey menus.

SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition

Name of softkey: HS1-HS8, VS1-VS8,

or RECALL plus the following keys:

Var1.st = ...

Var2 = Var3+ Var4...

Table of Contents