Functions For The "Nc Part Program" Display Object - Siemens sinumerik 840d sl Configuration Manual

9.2

Functions for the "NC part program" display object

Introduction
In order to also be able to operate the "NC part program" externally or, depending on the
functionality, to allocate an appropriate authorization, command buttons can be hidden in the
display object during the configuration. The required functionality can be triggered via
softkeys with various authorization levels.
Procedure
To add a new function, proceed as follows:
1. Open the editor for screens.
2. Select the "NC part program" display object.
3. In the inspector window, switch to "Properties > Events".
4. To add a new function, select it from the "<Add function>" dropdown list in the "keyboard
operation for display objects" directory.
Figure 9-1
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
"Keyboard operation for display objects" functions
Configuring PI services of the NC as system functions
9.2 Functions for the "NC part program" display object
121