Zooming The Display - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics
18.14 Trace
18.14.5.4

Zooming the display

Using the zoom function, you have the option of viewing selected sections of curves in detail.
After you have defined an area or a section, you can increase or decrease the size of it
(zoom in or zoom out).
Procedure
or
396
5. Press the "Scale" softkey to save the settings.
- OR -
Press the "Adapt selected" softkey to display the selected characteristic
graphs in the full graphic window.
Press the "Fit one" softkey to display the selected characteristic graphs
in the full graphic window.
1. A recording is opened in the "Trace" graphics window.
2. Press the "Zoom" softkey if you wish to zoom-in or zoom-out on the
characteristic graphs.
3. The "X time axis" or "Y value axis" softkey is selected.
4. Press the "Adapt individually" or "Adapt all" softkey if you wish to display
all selected characteristic graphs in a separate area positioned one
above the other.
- OR -
Press the "Adapt together" softkey if you wish to adapt all of the
characteristic graphs to the graphic window.
As all of the curves fill the complete window area, they are displayed
superimposed on one another.
- OR -
Press the "Individually adapt X" softkey if you wish to normalize the X
time axis only in the graphic window.
- OR -
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)