Connectable components
9.3 PP 72/48D 2/2A PN
9.3.3
Mounting
The I/O module can be fastened to the wall of the control cabinet using a mounting plate.
The module must be installed according to EN 60204.
Mounting versions:
● Portrait mounting at the lateral strap of the mounting plate (2x M5 or M6 screws).
● Flat mounting at the rear wall of the mounting plate (4x M5 or M6 screws).
9.3.4
Connection
9.3.4.1
Interface overview
Figure 9-16
Connection options of the PP 72/48D 2/2A PN I/O module
118
WARNING
A protective conductor must be connected using the grounding screw.
NCU 7x0.3 PN
Manual, 09/2011, 6FC5397-1EP40-0BA0