Arrays - Siemens SINUMERIK 840D sl Commissioning Manual

Expanding the Operator Interface (BE1)
3 Syntax
3.3.12

Arrays

Arrays are tables in which data can be stored.
Arrays can be one- or two-dimensional. A one-dimensional array is treated like a
two-dimensional array with just one line or column.
Definition
Arrays have start identifier //A and end identifier //END. The number of lines and
columns is optional. An array is structured in the following way:
//A(identifier)
(a/b...)
(c/d...)
...
//END
where:
Identifier
a, b, c, d
Note
Values of the String type must be enclosed in quotation marks.
//A(Thread)
; Size / Pitch / Core diameter
(0.3 / 0.075 / 0.202)
(0.4 / 0.1
(0.5 / 0.125 / 0.338)
(0.6 / 0.15
(0.8 / 0.2
(1.0 / 0.25
(1.2 / 0.25
(1.4 / 0.3
(1.7 / 0.35
//END
Downloading
The LA (Load Array) function can be used to load an array from another file.
LA(Identifier [, File])
where:
Identifier
File
Note
If an array in the current configuration file must be replaced by an array from
another configuration file, then both arrays must have the same name.
BE1/3-50
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Name of array
Values of array
/ 0.270)
/ 0.406)
/ 0.540)
/ 0.676)
/ 0.676)
/ 1.010)
/ 1.246)
Name of array to be loaded
File in which the array is defined
© Siemens AG, 2005. All rights reserved
08/2005