Adapting The User Interface; Change Language - Siemens SINUMERIK 840D sl Commissioning Manual

Adapting the user interface

8.1

Change Language

The HMI sl software is available in six languages as standard:
You can set the selection method for the user interface language via a display machine data
item.
Selecting first language
MD9100 $MM_CHANGE_LANGUAGE_MODE
Language selection mode
= 1
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
The user-interface language is specified via the "Language Selection" window
(default setting).
1. Select the "Startup" operating area.
2. Press the "Change language" softkey.
The small "Language Selection" window opens. The language most
recently set is highlighted.
3. Switch the cursor to the required language.
4. Press the "INPUT" key.
- OR -
8
35