Spindle Diagnostics - Siemens SINUMERIK 840D sl Commissioning Manual

State
Slave OK
Slave fault
Slave is available, but not configured Yellow
Procedure
18.16

Spindle diagnostics

18.16.1 Evaluation of the status signals
Main spindle drives are monitored with various status signals. The DRIVE-CLiQ connection
at the spindle can be used to evaluate these signals in the drive. For a more effective
diagnosis of the spindle operating states, the status signals are evaluated and the following
information displayed on the user interface:
● Operating hours
● Temperatures
● Speed/power
● Logistics data
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Marking
Green
Red
1. Select the "Diagnostics" operating area.
2. Press the menu forward key twice and the "AS-i diag." softkey.
The "Diagnostics AS-Interface" window is opened.
3. Select the required DP AS-interface.
The complete diagnostics information is displayed.
The values in italics indicate an error counter > 0.
Software option
For the "Spindle diagnostics" you require the "S-Monitor" option.
Service and diagnostics
18.16 Spindle diagnostics
405