5. Here, select the target language in which the files are to be created. Only those languages
are listed here, which are not yet included in the project. By default, initially only the standard
languages are listed. Additional languages are listed for selection by setting the check mark
for "All languages".
6. Select the master copy. The languages that are already available in the project are listed
here.
7. With "OK", the files are created in the selected target language.
For more information, refer to chapter Auto-Hotspot.
8. The newly generated files are displayed in the project dialog.
Figure 6-21
9. This function is available for all supported files (Alarm texts, Easy Screen, etc.).
6.2.8
Adding a file
You can add one or more existing files to the project with this function. The AMM copies these
files to the project structure.
Note
Note the central security information in Section Auto-Hotspot.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Project dialog (OFFLINE) - languages
Operator control (software)
6.2 Project
103