Tool Details; Displaying Tool Details - Siemens SINUMERIK 840D sl Operating Manual

Tool management

13.9 Tool details

Procedure
Multiple load points
For a magazine, if more than one loading point was set-up, using the "Select loading point"
softkey, you have the option of opening a window in which you can assign a loading point to
a magazine.
13.9 Tool details
13.9.1

Displaying tool details

The following parameters of the selected tool can be displayed using softkeys in the "Tool
Details" window.
● Tool data
● Cutting edge data
● Monitoring data
660
1. The magazine list is open.
2. Press the "Delete all" softkey.
- OR -
Press the "Unload all" softkey.
- OR -
Press the "Load all" softkey.
- OR -
Press the "Relocate all" softkey.
A prompt is displayed as to whether you really want to delete, unload,
load or relocate all tools.
3. Press the "OK" softkey to continue with deleting, unloading, loading or
relocation of the tools.
The tools are deleted, unloaded, loaded or relocated in the magazine in
ascending magazine location number order.
4. Press the "Cancel" softkey if you wish to cancel the unloading operation.
Operating Manual, 05/2017, A5E40868956
Milling