Modifying Installed Program Parts - Siemens SINUMERIK 840D sl Operating Manual

Installation
2.2 Installation via command line
Example of a call for an English installation and OPFILE.txt in the setup folder
setup.exe /W /L1033 /V"commandline=\"\"\"-OF:OPFILE.txt\"\"\""
Example of a call for a German installation and OPFILE.txt with absolute path data
setup.exe /W /L1031 /V"commandline=\"\"\"-OF:D:\mySetupConfiguration
\OPFILE.txt\"\"\""
2.2.3

Modifying installed program parts

The individual installed program parts (Diff, Topo, Expert, Samples) can be easily added or
removed afterwards.
There are three versions:
Version 1
1. If you have installed Windows XP , in the start menu, select:
"Start > Settings > Control Panel > Software".
If you have installed Windows 7, select
"Programs and functions."
2. Then select Create Create MyConfig 4.7 + SP2 and click "Change."
3. Select the program parts that you wish to add or remove.
Version 2
1. Start the "setup.exe" again on the CD.
You then go to the same dialogs, and you can proceed as in version 1. The precondition is
that the same setup.exe is used as was used to install the version.
Version 3
1. Use the "OPFILE.txt" control file described above to add or delete program parts
subsequently.
If you specify another configuration for Features, that is the configuration that will be
installed.
–
– If, instead of the installed Topo, you only want Diff to be installed, the "Features"
18
If you have already installed "Topo," and you also wish to install "Diff," the "Features"
parameter looks like this:
Features=Topo,Diff
parameter looks like this:
Features=Diff
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD