Cylinder Surface Transformation, End Face Machining - Siemens SINUMERIK 840D sl Commissioning Manual

11/2006
9.3

Cylinder surface transformation, end face machining

9.3.1 General
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
9.3 Cylinder surface transformation, end face machining
The cylinder surface transformation and end face machining functions can be
used to machine the peripheral and end faces of a turned part.
The functions "cylinder surface transformation" (Tracyl) and "face end machin-
ing" (Transmit) are a software option set on the CNC–ISO operator interface.
The Order No. is: 6FC5 800–0AM27–0YB0.
These functions must also be set up via machine data.
S
Face–end machining main spindle: Transformation 1
MD 24100 $MC_TRAFO_TYPE_1=256 (without Y axis)
MD 24100 $MC_TRAFO_TYPE_1=257 (with Y axis)
S
Face–end machining counter–spindle: Transformation 2
MD 24200 $MC_TRAFO_TYPE_2=256 (without Y axis)
MD 24200 $MC_TRAFO_TYPE_1=257 (with Y axis)
S
Cylinder surface transformation main spindle: Transformation 3
without groove side offset (without Y axis):
MD 24300 $MC_TRAFO_TYPE_3=512
with groove side offset (with Y axis):
MD 24300 $MC_TRAFO_TYPE_3=513
with groove side offset and Y correction:
MD 24300 $MC_TRAFO_TYPE_3=514
S
Cylinder surface transformation counter–spindle: Transformation 4
without groove side offset (without Y axis):
MD 24400 $MC_TRAFO_TYPE_4=512
with groove side offset (with Y axis):
MD 24400 $MC_TRAFO_TYPE_4=513
with groove side offset and Y correction:
MD 24400 $MC_TRAFO_TYPE_4=514
Note
For each of the individual transformations you must also set up other machine
data (see following sections).
The "cylinder surface transformation" and "end face machining" functions are
automatically integrated in the ShopTurn cycles, with the exception of "straight
line" and "circle". For these two cycles you can call the functions in the operating
area – Program under Straight line, Arc, Tool.
References: /BAT/, ShopTurn Operating/Programming Guide
9 Additional Functions
9-131