Displaying Si Communication Data - Siemens SINUMERIK 840D sl Commissioning Manual

Safety Integrated
21.2 Safety Integrated diagnostics
21.2.8

Displaying SI communication data

Signals and values for the following communication data are displayed in the "SI
Communication (General)" window:
● Parameterized CPU-CPU communication clock cycle status
● Actual CPU-CPU communication clock cycle status
● Maximum CPU-CPU communication clock cycle
● Number of active send data connections (F_SENDDP)
● Number of active receive data connections (F_RECVDP)
Procedure
446
4. Press the "Axis +" or "Axis -" softkey.
The values of the next or the previous axis are displayed.
- OR -
Press the "Axis selection" softkey and select the desired axis directly
from the displayed list of available axes.
1. Select the "Diagnostics" operating area.
2. Press the "Menu forward" key and then the "Safety" softkey.
3. Press the "SI communication" softkey.
The "SI Communication (General)" window opens.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)