Op Hotkeys - Siemens SINUMERIK 840D sl Commissioning Manual

Expanding the Operator Interface (BE1)
5 Configuring OP Hotkeys and PLC Keys
5.1.1

OP hotkeys

Standard layout
The 6 OP hotkeys are laid out in 2 lines, each of which contains 3 keys:
Line 1
Label
(no symbol)
Configured as
Line 2
Label
(no symbol)
Configured as
Optional HK7 and HK8
The OP keys "Machine" and "Menu Select" can be configured in the same way as
HK1 to HK6. They can be used:
To disable the standard functions of these keys and to activate new dedicated
functions.
Label
(no symbol)
Configured as
Details about HK7 and HK8 can be found in 5.1.3
Menu Select as HK7, HK8.
Note
Hot keys 1 and 7 (M key) cannot be determined by the hardware on the OP10S
(position of labeling). Hot key 7 is always triggered when one of the keys is
pressed. If HK1 is configured, this event can only be triggered by an external
(MFII) keyboard.
BE1/5-120
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Depends on OP
OP10 Machine
OP10C Machine
OP10S Position
HK1
Prg. Manager
HK4
Machine
HK7
Program Offset
HK2 HK3
Alarm Custom
HK5 HK6
Menu
Select
HK8
Configuring the M key and
© Siemens AG, 2005. All rights reserved
08/2005