Position Spindle - Siemens SINUMERIK 828D Operating Manual

Execution in manual mode
3.2 Selecting a tool and spindle
Note
Changing the spindle speed
If you enter the speed in the "Spindle" field while the spindle is rotating, the new speed is
applied.
3.2.4

Position spindle

Procedure
Note
You can use this function to position the spindle at a specific angle, e.g. during a tool
change.
• A stationary spindle is positioned via the shortest possible route.
• A rotating spindle is positioned as it continues to turn in the same direction.
108
1. Select "JOG" mode.
2. Press the "T, S, M" softkey.
3. Select the "Stop Pos." setting in the "Spindle M function" field.
The "Stop Pos." entry field appears.
4. Enter the desired spindle stop position.
The spindle position is specified in degrees.
5. Press the <CYCLE START> key.
The spindle is moved to the desired position.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling