2.5.4
Displaying and editing settable zero offset
All settable offsets, divided into coarse and fine offsets, are displayed in the "Zero offset -
G54..G599" window.
The current active zero offsets are displayed on a green background.
The rotation, scaling and mirroring are displayed if they are set.
Proceed as follows
Note
Activate settable zero offsets
The settable zero offsets must first be selected in the program before they have an impact.
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "G54...G599" soft key.
The "Zero offset - G54..G599" window is opened.
4.
You can edit the values directly in the table.
Setting up the machine
2.5 Work offsets
43