Machine and setting data
7.10 User views
Selecting a particular machine data item
7.10.3
Deleting a user view
Procedure
or
Just like before, as an alternative, it is possible to delete a user view under "System data"
under the following path: ..
88
You can use the Search dialog box to look for a particular data item.
Press the "Go to start" softkey to start the search at the first entry.
Press the "Go to end" softkey to start the search at the last entry.
Press the "Continue search" softkey if the data found during the search
does not match up with what you are looking for.
1.
Select the "Start-up" operating area.
2.
press the "Machine data" softkey.
3.
Press the "User views" softkey.
4.
Press the "Manage view" softkey.
5.
Select the desired view from the selection list.
6.
Press the "Delete view" softkey.
With the final confirmation prompt you will be requested to confirm
with either "Yes" or cancel with "No".
The "User views" dialog is then redisplayed.
/user/sinumerik/hmi/template/user_views
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)