Changing File And Directory Properties - Siemens SINUMERIK 840D sl Operating Manual

Procedure
14.11

Changing file and directory properties

Information on directories and files can be displayed in the "Properties for ..." window.
Information on the creation date is displayed near the file's path and name.
You can change names.
Changing access rights
Access rights for execution, writing, listing and reading are displayed in the "Properties"
window.
● Execute: Is used for the selection for execution
● Write: Controls the changing and deletion of a file or a directory
For NC files, you have the option to set the access rights from keyswitch 0 to the current access
level, to be set separately for each file.
If an access level is higher than the current access level, it cannot be changed.
For external files (e.g. on a local drive), the access rights are displayed to you only if settings
have been executed for these files by the machine manufacturer. They cannot be changed via
the "Properties" window.
Settings for the access rights to directories and files
Via a configuration file and MD 51050, access rights of the directories and file types of the NC
and user memory (local drive) can be changed and pre-assigned.
Milling
Operating Manual, 05/2017, A5E40868956
1. Select the "Program manager" operating area.
2. Choose the desired storage location and position the cursor on the file or
directory that you would like to delete.
3. Press the ">>" and "Delete" softkeys.
A prompt appears as to whether you really want to delete the file or di‐
rectory.
4. Press the "OK" softkey to delete the program/directory.
- OR -.
Press the "Cancel" softkey to cancel the process.
14.11 Changing file and directory properties
Managing programs
703