Nc Part Program" Display Object - Siemens sinumerik 840d sl Configuration Manual

Configuring screen objects

8.2 "NC part program" display object

8.2 "NC part program" display object
Introduction
The "NC part program" display object allows you at runtime to display and select part
programs, subprograms or workpieces as overview.
The display object can be found in the Task Card "Tools" below "Controls".
Configuration options
To make the part program overview functionally complete, you can configure function keys
or configured command buttons with NC part program functions (e.g. navigating and
selecting in the list directory).
You can specify the properties of the display objects during the configuring, e.g. what font it
should have. See also: Properties of the "NC part program" display object (Page 116)
114
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014