Coordination Via Part Program And Synchronized Action (Lock, Unlock, Reset, Cancel) - Siemens SINUMERIK 828D Function Manual

Detailed description

2.10 Coordination via part program and synchronized action (LOCK, UNLOCK, RESET, CANCEL)

2.10 Coordination via part program and synchronized action (LOCK,
UNLOCK, RESET, CANCEL)
Each modal and static synchronized action must be assigned a unique identification number
during the definition:
Program code
ID=<number> condition part DO action part
IDS=<number> condition part DO action part
By specifying the identification number, synchronized actions from part programs and from
synchronized actions can be coordinated via the following commands:
Keyword
LOCK(<number>)
UNLOCK(<number>)
RESET(<number>)
CANCEL(<number>)
Can be programmed in the part program
1)
Can be programmed in a synchronized action / technology cycle
2)
126
Meaning
: Lock synchronized action
An active positioning action is interrupted.
: Continue interrupted synchronized action
An interrupted positioning operation is continued.
: Cancel synchronized action
An active positioning action is cancelled.
If a technology cycle is restarted, then it is processed from the
1st block in the technology cycle.
Depending on the type of the condition, the actions are
performed again when the condition is fulfilled again. Already
executed synchronized actions with condition
processed again after RESET.
: Delete synchronized action
An active positioning action is terminated.
are not
WHEN
Function Manual, 07/2012, 6FC5397-5BP40-3BA0
TP SA
1) 2)
- x
- x
- x
x -
Synchronized actions