General information on workpiece production
2.4.5 Program editor - useful functions
In the program editor, you can conveniently open larger mold-making programs yourself; you can
also edit these and this, independent of the archiving location (NC, CF card, USB stick...). In
addition to standard functions, it offers additional helpful functions such as cut out, copy, paste
and renumber for effectively programming and displaying large programs.
Program editor supplementary functions
Dual editor and syntax
highlighting
Subprogram call with
transfer of the complete path
Dual editor - two programs can be simultaneously opened next to one another
Structuring large programs by creating blocks (blocks are opened and closed)
Scalable display, changing the font size
Syntax highlighting, color coding NC functions
Determine machining times through simulation and display block-by-block/non-modally
Subprogram calls, including path information, directly using the Various softkey
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
2.4
3
2
1
37