Position The Cursor - Siemens SINUMERIK 840D sl Commissioning Manual

or
Zoom in/zoom out area
18.14.5.5

Position the cursor

Using the cursor, you have the option of determining the precise values from a defined
section. To do this, the cursor is positioned directly on the curve.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Press the "Individually adapt Y" or "Adapt all" softkey if you only wish to
scale the Y value axis in the graphic window.
- OR -
Press the "Adapt Y together" softkey if you wish to adapt the value axis
of all characteristic graphs to the graphic window.
As all curves fill the complete window area, they are displayed
superimposed.
5. Press the "Zoom +" or "Zoom -" softkey until the desired display size is
reached.
Press the "Zoom area" softkey to define a specific section.
A frame is displayed.
Press the "Zoom +" or "Zoom -" softkey to change the frame step-by-
step.
Press the "OK" softkey to display the zoom area.
Service and diagnostics
18.14 Trace
397