Use Of Ethernet Interfaces - Siemens SINUMERIK 840D sl Manual

Component
TM41
TM120
Further references for SINAMICS S120 components
● You can find information about Line, Motor and Power Modules in:
● You can find information on the Combi in the "SINAMICS S120 Combi" manual.
● You can find information on the HF Motor Modules and the associated components in the
● You can find information on all other modules in "Manual Control Units and supplementary
7.6

Use of Ethernet interfaces

Application
The following connections can be established via the Ethernet interfaces:
● X120 provides the link to the system network (e.g. operator panels).
● X130 connects the NCU to the company network.
● X127 is used for commissioning and remote diagnostics via teleservice adapter IE.
Properties
The interfaces are full duplex 10/100/1000 Mbit Ethernet ports. Both ports are connected as
an Ethernet terminal.
NCU 7x0.3 PN, NCU 7x0.3B PN
Manual, 06/2014, 6FC5397-1EP40-5BA1
– Equipment Manual Booksize Power Units
– Chassis Power Units Equipment Manual
– AC DRIVE Manual
"High Frequency Drive System Manual".
system components".
You can find further details in the following manuals:
– SINUMERIK 840D sl Basesoftware and Operating Software Commissioning Manual
– SIMATIC TS Adapter IE Manual
Description
The number of available digital inputs and outputs within a drive system
can be expanded using a Terminal Module; an incremental encoder can
also be emulated.
The TM120 Terminal Module is used for temperature evaluation with
protective separation. It can be used for 1FN, 1FW6 and third-party
motors.
Connecting
7.6 Use of Ethernet interfaces
55