Fundamental Geometrical Principles
1.2 Position of zero points
Working planes
The working planes are specified as follows in the NC program with G17, G18 and G19:
Level
X/Y
Z/X
Y/Z
1.2
Position of zero points
The various origins (zero points) and reference positions are defined on the NC machine.
They are reference points
• for the machine to approach and
• for programming the workpiece dimensions.
The diagrams show the zero points and reference points for drilling/milling machines and
turning machines.
Milling:
22
Designation
G17
G18
G19
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Infeed direction
Z
Y
X
Fundamentals