Equipment Damage Due To Electric Fields Or Electrostatic Discharge; Warranty And Liability For Application Examples - Siemens SINUMERIK Series Function Manual

Fundamental safety instructions

2.3 Warranty and liability for application examples

Malfunctions of the machine as a result of incorrect or changed parameter settings
As a result of incorrect or changed parameterization, machines can malfunction, which in turn
can lead to injuries or death.
● Protect the parameterization (parameter assignments) against unauthorized access.
● Handle possible malfunctions by taking suitable measures, e.g. emergency stop or
2.2

Equipment damage due to electric fields or electrostatic discharge

Electrostatic sensitive devices (ESD) are individual components, integrated circuits, modules
or devices that may be damaged by either electric fields or electrostatic discharge.
NOTICE
Equipment damage due to electric fields or electrostatic discharge
Electric fields or electrostatic discharge can cause malfunctions through damaged individual
components, integrated circuits, modules or devices.
● Only pack, store, transport and send electronic components, modules or devices in their
● Only touch components, modules and devices when you are grounded by one of the
● Only place electronic components, modules or devices on conductive surfaces (table with
2.3 Warranty and liability for application examples
Application examples are not binding and do not claim to be complete regarding configuration,
equipment or any eventuality which may arise. Application examples do not represent specific
customer solutions, but are only intended to provide support for typical tasks.
As the user you yourself are responsible for ensuring that the products described are operated
correctly. Application examples do not relieve you of your responsibility for safe handling when
using, installing, operating and maintaining the equipment.
10
WARNING
emergency off.
original packaging or in other suitable materials, e.g conductive foam rubber of aluminum
foil.
following methods:
– Wearing an ESD wrist strap
– Wearing ESD shoes or ESD grounding straps in ESD areas with conductive flooring
ESD surface, conductive ESD foam, ESD packaging, ESD transport container).
SINUMERIK Run MyCC /ROCO
Function Manual, 09/2018, A5E45818879B AA