Managing programs
14.17 Setup data
14.16.4
Read in archive from system data
If you want to read in a specific archive, you can select this directly from the data tree.
Procedure
...
14.17
Setup data
14.17.1
Backing up setup data
In addition to programs, you also have the option of saving tool data and zero point settings.
In this way you secure the required tools and zero point data for a specific machining step
program. If you want to execute this program at a later point in time, then you can quickly
access the relevant settings.
720
1.
Select the "Startup" operating area.
2.
Press the "System data" softkey.
3.
In the data tree below the "Archive" directory, in the "User" folder,
select the file that you wish to read in.
4.
Press the "Read in" softkey.
5.
Press the "OK" or "Overwrite all" softkey to overwrite existing files.
- OR -
Press the "Do not overwrite" softkey if you do not want to overwrite
already existing files.
- OR -
Press the "Skip" softkey if the read-in operation is to be continued
with the next file.
The "Read In Archive" window opens and a progress message box
appears for the read-in process.
You will then obtain a "Read error log for archive" in which the
skipped or overwritten files are listed.
6.
Press the "Cancel" softkey to cancel the read-in process.
Operating Manual, 05/2017, A5E40868956
Milling