Entering Asian Characters - Siemens SINUMERIK 840D sl Operating Manual

2.4.12.2

Entering Asian characters

Precondition
The control has been switched over to Chinese.
Procedure
Editing characters using the Pinyin method
+
Editing characters using the Zhuyin method (only traditional Chinese)
+
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Enter the desired phonetic notation using Latin letters. Use the upper
input field for traditional Chinese.
3. Press the <Cursor down> key to reach the dictionary.
4. Keeping the <Cursor down> key pressed, displays all the entered pho-
netic notations and the associated selection characters.
5. Press the <BACKSPACE> softkey to delete entered phonetic notations.
6. Press the number key to insert the associated character.
When a character is selected, the editor records the frequency with
which it is selected for a specific phonetic notation and offers this char-
acter at the top of the list when the editor is next opened.
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Enter the desired phonetic notation using the numerical block.
Each number is assigned a certain number of letters that can be select-
ed by pressing the numeric key one or several times.
Introduction
2.4 Operator interface
51