Note For The Installation Clearance For The Connection Cables; General; Clearance Of The Power Components - Siemens SINUMERIK 840D sl Manual

Structure of the drive group

2.5 Note for the installation clearance for the connection cables

2.5 Note for the installation clearance for the connection cables
2.5
2.5.1

General

The arrangement of the components and equipment takes account of
● Space requirements
● Cable routing
● Bending radiuses of the connection cables
● Cooling
● EMC
Components are usually located centrally in a cabinet.
The necessary mounting and installation clearances above an below the components can,
under certain circumstances, exceed the minimum clearances specified in the product
documentation.
2.5.2

Clearance of the Power Components

The installation clearance is defined by
● Ventilation clearance
● Cable clearance
Figure 2-20
2-22
MOTION-CONNECT lines, see D21.1 catalog
Clearance in the vicinity of the power components
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0