Logging Measurement Results For The Workpiece Zero - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine
4.6 Measuring the workpiece zero
Note
Settable zero offsets
The labeling of the softkeys for the settable zero offsets varies, i.e. the settable zero offsets
configured on the machine are displayed (examples: G54...G57, G54...G505, G54...G599).
Please refer to the machine manufacturer's specifications.
4.6.2

Logging measurement results for the workpiece zero

When measuring the workpiece zero, you have the option to output the values that have been
determined to a log.
The following data are determined and logged:
● Date/time
● Log name with path
● Measuring version
● Input values
● Correction target
● Setpoints, measured values and differences
Note
Logging active
The measurement results can only be entered into a log once the measurement has been fully
completed.
86
4. Traverse the tool in the Z direction and scratch the workpiece.
5. Enter the position setpoint of the workpiece edge Z0 and press the "Set
ZO" softkey.
Operating Manual, 05/2017, A5E40868721
Turning