Licensing - Siemens SINUMERIK 840D sl Commissioning Manual

Licensing

Licenses are required for the activated options. When you purchase licenses you receive a
"license key" that contains all options requiring a license and which is only valid for your
CompactFlash card.
Precondition
If you wish to set or reset the options for a machine, you require at least access level 3
(user).
You can only license options for a machine from this access level and higher.
General information
Serial number of the
CompactFlash card
Hardware type
Machine name/No.
License key
Procedure:
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Permanently defined serial number of the CompactFlash card
Control data
Displays the data that is saved in machine data
MD17400 $MN_OEM_GLOBAL_INFO.
Only with access level 1 (manufacturer) can a display field be edited.
Information about options that require a license
1. Select the "Start-up" operating area.
2. Press the menu forward key.
3. Press the "Licenses" softkey.
The "Licensing" window appears and you can select the following
with the vertical softkeys:
• Determining the license requirement
– Overview
– All options
– Missing licenses
• Exporting licensing requirements
• Entering or reading in "License key"
3
25