Creating A New Machine As A Copy - Siemens SINUMERIK Series Function Manual

03/2012

6.1.5 Creating a new machine as a copy

Function description
Before ePS Network Services can be used on a machine, it must be set up on the
ePS server. To make it easier to set up similar machines, a machine that has al-
ready been set up can be created as a copy. All of the configurations are adopted
by the existing machine, with the exception of the machine master data, which
must be edited as the machine ID will be the unique point of identification for the
new machine.
In addition to copying, the following functions are also available in the "Machines"
menu:

Editing the master data of the machine

Deactivating, activating or deleting a machine

Copying a machine with its settings and user configurations to a new machine
that is then created.
Fig. 6-11: Machine - list
Function
Number of lines
Machine ID
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Creates a new machine in the user organiza-
tion.
The number in the display indicates the num-
ber of lines per screen that can be shown in
this menu. You can select up to 200 lines. A
scroll bar will then be displayed on the screen.
Displays all machines taken into account in the
filter. The display can be in either descending
or ascending order.
6 Management
6.1 Organization administration
Type
ACTION
DISPLAY
SELECTION
DISPLAY
ACTION
6-287