Configure The Tool Lists; Overview - Siemens SINUMERIK 840D sl Commissioning Manual

13.3

Configure the tool lists

13.3.1

Overview

The entries used for configuring the following list views are located in the
<LISTCONFIGURATION> tag:
● "Tool List" window, <SlTmToollistForm> identifier, see first example
● "Tool Wear" window, <SlTmToolwearForm> identifier
● "Magazine" window, <SlTmToolmagazinForm> identifier
● "Tool Data OEM" window, <SlTmTooloemForm> identifier
Entries
Enabled
CAPTION
COLUMNX
TOOLTYPE_ALL
TOOLTYPE_XXX
EMPTY_MAG_PLACE
Item
DELETE_COLUMN
INSERT_COLUMN
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
This window is hidden in the default configuration. The window is only displayed when
you enable it under <Enabled>. See second example.
Meaning
true - Window appears.
false - Window is hidden.
Definition of the list name.
See first example: "Tool list" appears on the user interface for the
"TM_CAPTION_TOOLLIST" identifier.
Column selection: X stands for the column number.
The column setting applies to all tool types (_ALL).
The column setting applies to a particular tool type (_XXX). XXX stands
for the number of the tool type.
The column setting applies to an empty magazine location. Empty
magazine locations appear in a list sorted according to magazine.
Identifier of the list parameter.
See example: The column in which the magazine number and
magazine location are displayed is created for the "ToolInMagInPlace"
identifier.
Tool parameter identifiers (Page 87)
Cutting parameter identifiers (Page 88)
Monitoring parameter identifiers (Page 90)
Magazine location parameter identifiers (Page 90)
Delete column.
Insert column.
Configuring tool management
13.3 Configure the tool lists
85