Additional Language - Siemens SINUMERIK 840D sl Commissioning Manual

Additional language

23.1 Installing additional languages
Additional languages
In addition to the already existing standard languages, additional user interface languages
are available on a separate DVD.
The integrated online help is either displayed in the relevant language of the country or in
English.
Refer to the following chapter for the languages that are available for the user interface:
Supported languages (Page 584)
Precondition
● After the installation, approx. 256 MB memory must be available on the CompactFlash
● Language extension software "hmi_sl_language_xxx_02.06.00.00.00y.arc".
Installing a language
Install the language the same as for a commissioning archive (ARC). For the procedure,
please refer to the following Chapter: Reading-in a start-up archive (Page 280)
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Card.
xxx = language code, y = internal version ID
Is supplied on the language extension DVD.
23
583