1.1.6
Plane designations
When programming, it is necessary to specify the working plane so that the control system
can calculate the tool offset values correctly. The plane is also relevant to certain types of
circular programming and polar coordinates.
A plane is defined by means of two coordinate axes.
Milling:
Turning:
The third coordinate axis is perpendicular to this plane and determines the infeed direction of
the tool (e.g., for 2D machining).
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Fundamental Geometrical Principles
1.1 Description of workpiece points
21