Selecting A Program - Siemens SINUMERIK Series Operating Manual

Milling
Hide thumbs Also See for SINUMERIK Series:
Table of Contents

Advertisement

6.2

Selecting a program

Procedure
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
1.
Select the "Program Manager" operating area.
The directory overview is opened.
2.
Select the location where the program is archived (e.g. "NC")
3.
Place the cursor on the directory containing the program that you want
to select.
4.
Press the <INPUT> key.
- OR -
Press the <Right cursor> key.
The directory contents are displayed.
5.
Place the cursor on the desired program.
6.
Press the "Select" softkey.
When the program has been successfully selected, an automatic change‐
over to the "Machine" operating area occurs.
Machining the workpiece
6.2 Selecting a program
191

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840d slSinumerik 840de slSinumerik 828d

Table of Contents