Sinumerik Control With Sinumerik Operate - Setting The Proxy - Siemens SINUMERIK 840D pl Manual

Installation/configuration

4.2 SINUMERIK control with SINUMERIK Operate - Setting the proxy

4.2 SINUMERIK control with SINUMERIK Operate - Setting the proxy
The SINUMERIK Operate operating software is delivered together with the
SINUMERIK Integrate Client software.
An update is not possible.
Note
Transferring SINUMERIK data on the MindSphere platform
The following steps allow you to transfer the SINUMERIK data to the MindSphere platform.
By performing the steps described below, Processes in which software scripts are loaded to the
SINUMERIK control are performed automatically, especially by input and confirmation of the
web service URL.
Requirement
SINUMERIK Integrate has been enabled for usage.
26
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB