Settings For The Measurement Result Log - Siemens SINUMERIK 840D sl Operating Manual

Procedure
4.7

Settings for the measurement result log

Make the following settings in the "Settings for measurement log" window:
● Log format
– Text format
– Tabular format
● Log data
– new
– attach
● Where the log is saved
The log created is saved in a specified directory.
Procedure
Turning
Operating Manual, 05/2017, A5E40868721
1. You are in the "JOG" mode and have pressed the "Workpiece zero" soft‐
key.
The "Measurement log" softkey cannot be used.
2. Select the required measurement version and measured the workpiece
zero as usual.
The measured values are displayed once the measurement has been
completed.
2. Press the "Measurement log" softkey to save the measurement data as
log.
The "Measurement log" softkey becomes inactive again.
The log in the text format is based on the display of the measurement results on the
screen.
When selecting the tabular format, the measurement results are saved so that the data
can be imported into a spreadsheet program (e.g. Microsoft Excel). This allows the
measurement result logs to be statistically processed.
The log of the actual measurement is created under the specified name. Existing logs
with the same name are overwritten.
The log created is attached to the previous log.
1. Select the "Machine" operating area.
2. Press the <JOG> key.
Setting up the machine
4.7 Settings for the measurement result log
87