First Start - Siemens SINUMERIK 840D sl Operating Manual

Description

4.2 First start

4.2 First start
Operating sequence
The following prompts appear when AMM is started for the first time:
1. Enter a password. AMM always requires a password when started for the first time.
Figure 4-2
– With the password, the file with the connection data of AMM is encrypted.
– The password can be subsequently changed at any time.
– In order to change the password, the previously entered password must be entered to
2. Press "OK".
AMM starts up with the language set in Windows.
If the relevant language is not available in AMM, English is automatically set.
The set language can be changed at any time via AMM.
3. If earlier versions of AMM are installed on your PG/PC, you are given the option of accepting
the connection data of the earlier versions. Confirm the acceptance of the data with "Yes"
or reject with "No".
You have successfully completed the first start of AMM. You can now use all the functions of
AMM.
20
Enter password
ensure that only authorized users change the password.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA