Measuring The Workpiece Zero - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Working with Manual Machine

16.3 Measuring the workpiece zero

Measuring the workpiece zero

You can use the following workpiece elements to determine the workpiece zero:

● Pocket/hole

You can measure the workpiece zero either manually or automatically (see Section "Measuring

the workpiece zero (Page 113)").

"Manual Machine" is active.

Press the "Workpiece zero" softkey.

Select the the required measuring variant in the vertical softkey bar and

press the appropriate softkey.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0