Selecting A Tool; Starting And Stopping A Spindle Manually - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Execution in manual mode

5.2 Selecting a tool and spindle

Selecting a tool

Select the "JOG" operating mode.

Press the "T, S, M" softkey.

Enter the name or the number of the tool T in the input field.

Press the "Select tool" softkey.

The tool selection window opens.

Place the cursor on the desired tool and press the "OK" softkey.

The tool is transferred to the "T, S, M... window" and displayed in the field

of tool parameter "T".

Select tool edge D or enter the number directly in field "D".

Select the sister tool ST or enter the number directly into the "ST" field

Press the <CYCLE START> key.

The tool is loaded into the spindle.

Select the "JOG" operating mode.

Press the "T, S, M" softkey.

Select the desired spindle (e.g. S1) and enter the desired spindle speed

(rpm) or the constant cutting velocity (m/min) in the adjacent input field.

The spindle remains stationary.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0