Displaying Details Of A Variable - Siemens SINUMERIK 840D sl Commissioning Manual

18.14.3.3

Displaying details of a variable

You can display the most important information and settings of the display at a glance in the
detail window, i.e. you do not have to use the scroll bar for example to get to the "Event"
column.
Displayed information
● Variable address
● Comment with a description of the variables
● Events
● Channel, axis, access level, mode group, etc.
● Smaller graphic display with the event; when this event occurs the characteristic graphs
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
are recorded as well as their settings, such as color, line type, etc.
1. You are in the "Select Variables for Trace: ..." window. ...".
2. Position the cursor to the required variable.
3. Press the "Details" softkey.
A subscreen with the most important information as well as the graphic
display is shown in the lower half of the window.
Press the "Details" softkey again to display the subscreen.
Service and diagnostics
18.14 Trace
389