Printing - Siemens Sinumerik 840D sl Function Manual

05.07

3.4.2 Printing

Print administrative data
The function for printing administrative data can only be called up in the list view
(right window) via the Print Administrative Data context menu. This function
activates the printout of the administrative data for the selected element.
Only users with the appropriate authorizations are allowed to use the print function.
See Section 5.3.5
Note
Multiple selections are possible. The administrative data of the selected elements
is then printed in succession.
There is no print function for workpieces.
Print NC data
The function for printing NC data can only be called up in the list view (right
window) via the Print NC Data context menu. This function activates the printout of
the selected NC data element (of the NC program).
Only users with the appropriate authorizations are allowed to use the print function.
See Section 5.3.5
Note
Multiple selections are possible. The NC data of the selected elements is then
printed in succession.
There is no print function for workpieces.
You can set the print format by choosing Tools  Settings.
You can specify whether the administrative data is to be printed in addition to the
NC data (usually NC programs).
Print format
To set the format for printing the NC data, choose Tools  Settings followed by
the appropriate option in NC Data Orientation.
Note
If configured, graphic data can also be printed.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
3 Operator interface
FBDN1/3-55